Martin riding a dragon to adjust the machine

Martini riding a dragon to adjust the machine:

1. Turn on the power supply 60- 120 minutes in advance, heat the rubber-wrapped rubber back and side rubber, and turn on the exhaust fan. The glue can't be opened until it is completely melted.

2. The temperature of the heating furnace for back glue is between 160 ~ 2 10℃, and the temperature of the heating furnace for side glue is between1/kloc-0 ~150℃.

3. After the rubber particles in the heating furnace of back glue and side glue are completely melted, the idle machine moves in, whether the rubber tire rotates normally and whether there is glue on the rubber tire.

4. Adjust the size of the cover plate splint to make the height of the vibrating plate and the size of the milling cutter moderate.

5. Adjust the gap between the fixed clamping plates so that the gap between the clamping plates is slightly smaller than the thickness of the product, so that books can be clamped. The adjustment of the book clamping plate on the book unloader is increased, and the size between the clamping plates is slightly larger, and the product is 5-8mm, which is convenient for clamping books.

6. Adjust the suction nozzle of the book feeder. Both sides of the suction nozzle and the splint are moderate, and the suction nozzle is aimed at the bottom of the paper to ensure that the paper can be discharged smoothly when the suction nozzle sucks the paper.

7. There are 15 book-adding ports in total. According to the quantity and size of products, it is suitable for automatic paper feeding on the book dropping machine.