How to install the suit door how to install the suit door

Now the suit door is welcomed by everyone, but it is easy to be damaged during installation, so everyone should know his installation method and some precautions before installation. Then, let's learn the detailed installation method of the suit door and the matters needing attention in the installation of the suit door.

First, the detailed installation method of the suit door

1, site cleaning

When you arrive at the door installation site, you can clean the door opening and installation site first, measure the size of the door opening, then plan the door installation method, and then measure the size of the door leaf, so as not to damage and dirty the wall and ground during construction.

2, door frame combination

For the detailed installation method of the suit door, the top plate of the door is 20 to 50 mm longer than the actual size of the door opening, and the gap between installing the door is 6 to 8 mm At the same time, two nails are nailed to fix the door frame. Then nail four pull tabs on the left and right sides of the door frame, put the door frame at the door, and nail two pull tabs in the middle of the top plate.

3. Install the door frame

Put the door frame in the middle of the doorway, and both sides must be flat. Use sawdust to make four fixing points in the gap between the door frame and the door openings on both sides. The height from the floor to the door leaf is 10 mm, and the vertical door frame is removed from the board where the hinge is installed and fixed.

Step 4 Install the door leaf

For the detailed installation method of the suit door, install hinges on the door leaf, and pay special attention to the flatness of the door leaf and door frame. Install the door leaf on the fixed door frame and close the door. You can try whether the switch is free and the door top is just right.

5. Install the pipeline

According to the size of the door frame, cut the line at 45 degrees, glue the vertical long line and the horizontal short line at 90 degrees with 502 glue, then nail it on the door frame and cover it with nail strips.

Step 6 Install the lock head

Cover the outer handle cover at the keyhole of the door leaf, take two screw positions, and drill two holes with a hand electric drill with a 10 mm twist drill. The lock core is installed in the door leaf from the side, and the lock core fixing screw is installed. Determine the installation position of the lock cover, cut the opening of the lock cover by hand and fix it with screws.

7. Install the door suction.

For the detailed installation method of the suit door, the door suction can be installed at 100 mm above the door bottom, and then fixed, so that the installation is completed.

Second, the door installation matters needing attention

1. In addition to fixing the door against the wall, wooden bricks or nails need to be nailed on the outside of the cover plate. The wooden brick should be trapezoidal and embedded in the wall to make the door cover stronger. When the door cover is more than two meters high, three are buried on each side; When it is less than 2 meters, two are buried on each side.

2. If the doors and windows of the suit are in contact with the masonry surface, it is necessary to carry out anti-corrosion treatment and apply anti-corrosion oil to prevent the contact surface between the doors and windows and the brick wall from being damp and decayed.

3. Installation workers should not only protect their own things, but also protect other products on site. If the installer causes damage to other products during installation, he can claim compensation.