Introduction of gas-fired heat transfer oil boiler

The gas-fired heat transfer oil boiler is made of heavy oil. Light oil or combustible liquid is used as fuel. Heat transfer oil is the heat carrier. Forced liquid phase circulation by circulating oil pump. The heat energy is transmitted to the thermal equipment. And then returns to the reheated once-through special industrial furnace. Widely used in petrochemical industry. Textile. Printing and dyeing. Plastic. Rubber. Food processing. Wood processing. Asphalt heating. Carton production. Vegetables are dehydrated. Baking paint Casting sand mold drying, etc., can also be used for baking, steaming, setting, melting and drying at ≤ 35oC. Gas heat conduction oil furnace is an assembled forced circulation vertical oil (gas) boiler. The heating surface of this series of boilers is compact in structure. The heating surface consists of disks arranged inside and outside closely. The inner coil is a radiation heating surface, and the outer coil and the outer surface of the inner coil form a convection heating surface. The boiler consists of an upper body and a lower combustion chamber, which are assembled on site. After the combustion is fully burned in the combustion chamber, most of the heat is absorbed by the radiation heating surface, and then the high-temperature flue gas enters the convection heating surface for heat exchange, and after leaving the boiler, the air required for boiler combustion is heated in the air preheater, and then the flue gas is sent to the chimney by the dust collector and discharged into the atmosphere by the induced draft fan.