Is the overall production of mahogany complicated?

If you want to make a house with all mahogany, the first step is to start with design and planning. The design must be based on the positioning of the enterprise and the style of the product, and the same is true for mahogany. First of all, we must design the shape and structure for the consumer groups, which should be designed according to the needs of customers. We must consider the practicality and the use of space for reasonable design in order to better meet people's life and life needs.

The second step, drawing design, is to choose wood. According to the national standard of mahogany, there are five genera and eight categories of mahogany, with 33 kinds of wood. Wood properties such as color, texture and odor density should be considered when selecting materials.

The third step is to purchase and prepare materials when selecting materials. When the wood is bought back, it must be cut. The cutting master should manipulate the color and texture of wood to ensure the standard of one wood and one device. After cutting, it is necessary to prepare for the drying process, and the drying process of wood is different. Drying is to improve the mechanical strength and performance of mahogany, prolong its service life, ensure the durability of furniture and prevent cracking and deformation. After careful selection, some bad materials are eliminated to prevent white skin and moth-eaten wood from flowing.

The fourth step, after half a month or a month of drying treatment, out of the furnace. Materials should be classified before they are put out of the furnace, so as to clean them better.

Step five, the following is the woodworking link. The whole house is completely assembled with mahogany, which can be said to rely entirely on woodworking technology. Good craftsmen will seriously consider the combination of tenon and mortise inside and outside each mahogany component when making, and use the experience of craftsmen to connect tenon and mortise skillfully and accurately. The carpenter's steps include planing, pressing, tenoning, slotting and drawing lines!

The sixth step is carving, which is divided into line carving, relief carving, round carving and through carving. And the carved flower-shaped map is divided into landscape map, flower-and-bird map and figure map.

Step 7: After the mahogany components are assembled, they will be scraped and polished. Shaving is a dirty and tiring job. You should prepare a mask to wear, because the polished dust is very heavy. In the process of scraping, the joints between lines and tenons must be cleaned, and the scraping method should be consistent, so as to better show the texture of wood. Finally, polish the furniture with fine sandpaper until the surface is smooth and comfortable.

Step eight, the following is the painting process. At present, the painting process is divided into raw lacquer and waxing, and beeswax is commonly used in waxing. These two processes are designed to add a layer of protection to mahogany. Waxing and painting are all made by hand. Usually, the prepared wax or raw lacquer is rubbed on the polished mahogany with soft cotton silk, polished and wiped repeatedly through multiple processes, and then naturally dried at constant temperature or dried in kang room to increase protection.