Which factory in jiepai town, Danyang City, Jiangsu Province produces automobile waterproof strips?

The automobile waterproof strip produced by this factory comes from the TPR automobile sealing strip manufacturer of left and right workers, and adopts TPR material. A thermoplastic soft rubber compound which has rubber elasticity and can be directly processed and molded (such as injection molding, extrusion, blow molding, etc.) without vulcanization. ).

When replacing all car bodies, sealing strips should be coated on the overlapping parts of the weld, and the thickness of the adhesive layer is about 1mm, and there should be no defects such as virtual adhesion and bubbles. All under-floor appearances and front wheel housing appearances shall be coated with 3-4 mm elastic coating and anti-corrosion coating. These methods can not only greatly enhance the tightness of the whole vehicle, slow down the corrosion speed of the body, but also greatly improve the ride comfort.

Precautions:

1, when opening and closing the door, pay attention to whether the stopper is abnormal, and don't use too much force when opening and closing the door. Whether the screws are loose. Even if there is a slight abnormal noise, it doesn't matter. You can rub some lubricating oil.

2. When getting on and off the bus, when the door is opened and closed, the key at the waist is easy to scratch the door. After a long time, traces will be formed, which will affect the brightness and beauty of car paint, so pay attention to the key points.