How to disassemble Huawei mate30pro fingerprint and cable?

Remove the rear cover 1. First take out the SIM card. 2. Heat the glass back cover with 90-degree hot air for 3 minutes. 3. Remove the rear cover with a suction cup and a tapping plate (be careful if there is glue, especially at the camera). 4. Carefully cut and separate the back cover (there are glue in four areas, so be careful when disassembling the cameras, and there are bubbles in all four cameras). ...

2.

Remove the 12 screw that secures the motherboard cover, and the three screws on the left. 2. Tear off the bottom paste and pick up the cover together (note that the left side of the cover is connected with a flash line, never. ...

3.

Mate 30 pro's front TOF transmitter uses copper tube to dissipate heat, and does work in place, away from the ambient light sensor. ...