The main responsibilities of the riveter position

Main Responsibilities of the Riveter Position 1

1. Be familiar with the product drawings, process procedures and related standards being processed, adhere to the "three presses" production operations, and achieve the "three self-sufficiency" One control”.

2. Cut, shear, and press according to the production plan to ensure the size and accuracy of cutting and pressing to meet the specified requirements, and carefully remove flash and burrs.

3. When laying flat plates, full consideration should be given to the release of internal stress to reduce deformation.

4. When assembling structural parts, it is necessary to check whether the parts transferred from the previous process are qualified. The tailor-welded workpieces must meet the requirements of the drawings and the seam gaps should be controlled to facilitate welding in the next process.

5. Take the initiative to submit the first piece for inspection, conduct self-inspection carefully, mark the parts and components, and fill in quality records.

6. Place parts in a reasonable and orderly manner, and clean up waste at the work site in a timely manner to ensure that it meets the requirements of on-site management.

7. Complete the production, quality, and safety targets on time. Main Responsibilities of the Riveter Job Part 2

Responsibilities of the Riveter Job

1. Seriously study and strictly abide by the company's rules and regulations, do not violate labor disciplines, do not work in violation of regulations, and are responsible for this position directly responsible for the work.

2. Strictly abide by the riveter's safety production operating procedures and operate carefully. The tools used must be in good condition, safe and reliable.

3. You must dress in accordance with the regulations when you are on duty. Properly keep and use various protective equipment and fire-fighting equipment properly. Keep the working environment clean and tidy and do a good job in civilized production.

4. The procedures for entering the container for maintenance must be complete and the safety measures must be reliable before entering the container for operation.

5. Correctly analyze, judge and deal with signs of various accidents, and nip accidents in the bud. When an accident occurs, promptly and truthfully report to superiors, protect the scene, and assist in accident investigation.

6. Participate in learning, raise awareness, do all work carefully and conscientiously, and do a good job in civilized production.

7. Consciously accept the inspection and supervision of supervisory and management personnel. Have the right to refuse instructions for illegal operations, and to discourage and stop others from illegal operations.

Safe operating procedures for riveters

1. Before work, carefully check the various tools used: large and small hammers, flat hammers, punches and other tools that are subject to hammering, whether there are burrs and scratches on the top, whether there are cracks on the hammer handle, and whether the installation is firm. It is strictly forbidden to use the tops of various tools that are subject to hammering during quenching.

2. When performing work such as shoveling, chopping, and riveting, you should wear protective glasses and do not operate in front of others. When using a pneumatic shovel, the shovel head must be removed during work breaks to avoid accidents. When the noise exceeds the specified limit, protective earplugs should be worn.

3． During work, when using hydraulic presses, friction presses, edge planers, shears and other equipment, you should first check whether the equipment is operating normally and strictly abide by the safe operating procedures of the equipment.

4. When punching steel plates, do not use round objects (such as iron pipes, iron balls, iron rods, etc.) as pads underneath to avoid rolling and injuring people.

5. When using a truck to overturn the work, the staff must leave the dangerous area, the spreader used must be carefully inspected in advance, and the safety operating procedures for truck lifting must be strictly followed.

6． When using a sledge hammer, pay attention to the range of the hammer head. When hammering, you must look forward and backward, and no one is allowed to stand opposite you to avoid danger when swinging the hammer.

7. The heated materials must be stored at a designated location. When moving, use drip test and other methods, and wait until it cools down before moving it by hand to prevent burns.

8． When working with a heating furnace, be aware of any wires or flammable items around it. When the furnace goes out, the damper should be opened to prevent explosion. After flameout, check carefully to avoid re-ignition and fire. The heated materials must be stored at a designated location.

9． When assembling riveting workpieces, if the holes are not correct, you are not allowed to test them with your hands. You must use a pointed piercing rod to align them, and then insert the nails. When punching the punch, no one is allowed to stand in the direction where the punch goes out.

10. When working at heights, fasten your seat belts, abide by the safety regulations for working at heights, and check in detail whether the operating frames and springboards are securely erected. When working on round workpieces, the bottom must be well padded. It is possible that no one is allowed to stand on top while rolling.

11. When throwing hot rivets from a distance, pay attention to whether there are other workers working across the area. To prevent pedestrians from passing through, fences and warning signs should be installed around the work site. The person attaching the rivets should do so on the side.

12. When connecting the compressed air pipe (belt), open the damper first and blow out the dirt in the air pipe (belt) before connecting it. When a blockage is found and needs to be penetrated with an iron bar, the head must be avoided. The trachea (belt) is not allowed to pass on the track.

13． When twisting nails and caulking, you must wear protective glasses; when hammering, you are not allowed to wear gloves.

14. When using a nail gun, load the nails first and then the nail bombs. After loading the nail bomb, do not slap the launch tube with your hands, and do not point it at the human body at any time. If shooting is not needed temporarily, nail bombs and nails must be withdrawn immediately. The main responsibilities of the riveter position Part 3

1 Scope

This standard specifies the quality requirements, responsibilities and authorities, work content and requirements, inspection and assessment content of the riveter position.

This standard applies to xxxxxx riveter positions.

2 Quality requirements

2.1 Ideology and style: "See the General Work Standards for Workers".

2.2 Educational level: junior high school or above.

2.3 After technical training, you should know and pass the examination.

2.4 Pass the safety, fire prevention, and TQC (Total Quality Control) knowledge learning examination.

2.5 Have good professional ethics. Obey assignments and follow instructions.

3 Responsibilities and Authority

3.1 Be responsible for the quality of your own work and product quality.

3.2 Responsible for equipment and personal accidents caused by illegal operation.

3.3 Be responsible for safe and civilized production in your own workplace.

4. Work content and requirements

4.1 Implement the "General Work Standards for Workers".

4.2 Responsible for all lofting, numbering, blanking, processing, prefabrication, group forming, assembly, riveting and other work in the manufacturing of metal structures assigned by superiors.

4.3 Labor protection equipment must be worn as required before taking up work.

4.4 The "Five Sequence Method" should be carefully implemented during the production process:

4.4.1 Preparation: Prepare product drawings, process technical documents, tooling, and measuring tools.

4.4.2 Second look: Understand the drawings, processes and standards, clarify the tasks, and check the measuring tools and processing objects.

4.4.3 Three reminders: If problems are found, report them to relevant departments for handling in a timely manner.

4.4.4 Fourth step: Act according to the rules and produce in strict accordance with drawings, processes and technical standards.

4.4.5 Five inspections: After inspection according to the prescribed procedures and passing the first inspection, it can be officially put into production.

4.5 The various equipment used must be determined by the person and the machine. The operator must pass the technical examination, operate the equipment with certificates, and maintain the equipment carefully.

4.6 Adhere to safe and civilized production.

4.6.1 When using pneumatic drills, electric hand drills, manual grinding wheels, plate rolling machines, presses, shearing machines, drilling machines and other equipment, their safety operating procedures must be strictly followed to avoid equipment and personal accidents.

4.6.2 When cutting materials and activating workpieces, the workpiece must be placed stably, and attention must be paid to pedestrians around it and in the aisle to prevent it from flying and injuring people.

4.6.3 The work site should be kept clean, tidy, and standardized at all times. Various parts and residual materials should be stored in categories. Remaining materials and waste materials should be cleaned and recycled in a timely manner to ensure that the site is clean after the work is completed.

4.7 Tools, molds, fixtures, materials, blanks, workpieces, products, etc. are arranged reasonably, stably and reliably.

4.8 When receiving parts, they must be checked according to the drawings and whether the material records are clear.

4.9 Operations must comply with safe operating procedures and process regulations.

4.10 The tool box must be kept clean and free of debris, and the tools must be in their proper places. Placed neatly, accounts, cards, and items match.

5 Inspection and Assessment

5.1 The squad leader is responsible for the supervision, inspection and assessment of the implementation of this standard. Leaders and professional functional personnel at all levels conduct random inspections and assessments and provide guidance.

5.2 The assessment results of this standard (including the general work standards for workers) are linked to the economic responsibility system and relevant regulations of the workshop, and rewards and penalties will be honored. Main Responsibilities of the Riveter Position Part 4

1. Job Responsibilities

1. Must comply with various rules and regulations formulated by the company. Obey orders, stick to the position, and strictly abide by labor disciplines.

2. Under the leadership of the office director, complete the riveter inspection business of container products and other tasks assigned by the office director.

3. Work must be done carefully, fairly, accurately and promptly.

4. Strictly implement national standards and relevant regulations for pressure vessel product manufacturing and inspection, and establish the ideas of "quality first" and "user first". Enhance the sense of responsibility and control quality.

5. Strictly implement the relevant regulations of the pressure vessel manufacturing quality assurance system.

6. Responsible for inspecting and labeling products according to drawings and process standards. Conduct whole-process finished product quality inspection from product parts cutting, assembly, pressure testing, painting, and packaging.

7. Responsible for verifying that all parts used in assembly have been inspected and accepted, and can only be assembled if they have a qualified report and a qualified mark.

8. Assembly procedures and workmanship quality should be checked to ensure assembly according to drawings.

9. Completion inspection: Responsible for a comprehensive review of all assembly control points. The supervisory inspector will be notified to go to the site for supervisory inspection and confirmation. If the product is qualified, it will be marked and recorded and a product material stamp distribution map will be drawn.

10. Responsible for inspecting the entire process of the hydraulic pressure test, and notifying the supervisory inspector to go to the site for supervision and confirmation. After the final pressure test is passed, fill in the pressure test qualification report form.

11. Responsible for inspection of paint and packaging quality.

12. Fill in the quality records according to the prescribed forms and be responsible for submitting product inspection records to the inspector, and be responsible for the accuracy and reliability of the inspection records. The handwriting of inspection records should be neat, clear and neat.

13. Identify, report and re-inspect and re-label unqualified products after treatment according to regulations to prevent unprocessed non-conforming products from being reordered.

14. Pay attention to the care of equipment and inspection tools. Do a good job in safe production and civilized production.

15. Work records should be carefully kept.

2. Employment standards

1. Age: in line with the working age.

2. Gender: No limit to male or female.

3. Educational background: high school or above.

4. Physical condition: good health, no infectious diseases, and able to adapt to a work environment with higher intensity of mental and physical work.

5. Love product quality inspection work, have a strong sense of responsibility, be decent and honest, and be able to study hard in business.

6. Vocational skills appraisal qualification: Engage in riveting work for more than five years, and obtain a professional qualification certificate for riveting work at the junior level and above.

7. Professional ethics: Implement the general standards of corporate behavioral culture and ethics of Lanshi Group Company.

8. Practical knowledge:

(1) Master the working procedures and inspection procedures of pressure vessel inspection positions;

(2) Be able to understand pressure vessel products

(3) Know the structural form of the company’s leading products;

9. Professional knowledge requirements:

(1) Have basic theoretical knowledge of elementary mathematics and mechanical drawing;

(2) Preliminary understanding of national standards, regulations and policies for pressure vessels;

(3) Brief understanding of the pressure vessel manufacturing process;

(4) Understand the grades, technical requirements and process performance of commonly used materials;

(5) Understand the use and maintenance methods of measuring instruments and testing tools;

10. Safety knowledge: Understand national and enterprise laws, regulations, and policies on production safety. The main responsibilities of the riveter position Part 5

1. Before construction, you must be familiar with the process drawings, clarify the technical requirements, and formulate a safe construction plan.

2. Abide by rules and regulations, safe operating procedures, labor disciplines and construction specifications, and do not operate in violation of regulations.

3. Wear labor protection equipment correctly when working according to regulations, use protective equipment correctly, and check the safety devices in a timely manner.

4. Operate correctly, carefully maintain equipment and tools, keep the working environment clean and tidy, and do a good job in civilized production.

5. Continuously identify hazards and environmental factors and take reduction measures to minimize them. Once an accident occurs, it should be reported immediately and truthfully, and control measures should be taken to protect the scene and cooperate with the accident investigation.

6. Actively participate in various safety and environmental protection activities, job training, and accident plan drills.

7. Have the right to refuse illegal instructions, and should discourage and stop others from doing illegal work.

8. Be responsible for the safety and environmental protection of your position.