What are the methods for stone maintenance and renovation?

Stone is a kind of material widely used in our decoration materials. Everyone knows that stone is a kind of natural stone. It needs to be maintained after being used for a long time, so the quality of stone Maintenance is particularly important. It includes: stone waxing, stone crystal surface hardening, waterproofing, marble joint repair, and stone lesion treatment.

Methods for stone maintenance and renovation include:

1. Clean the ground thoroughly, use a dry and clean floor mop to make sure there is no sand or impurities on the ground

2. After the overall cleaning of the stone surface is completed, use marble glue to repair the small damaged spots on each stone and the seams in the stone.

3. After the marble glue is dry, use a grinder to polish the entire floor. Grind the entire floor horizontally, focusing on the caulking glue between the stones (the diagonal corners between the stones) and near the wall. Keep the overall stone floor flat at the edges of edges, decorative shapes, and special-shaped shapes.

4. After polishing, use a water absorber to treat the moisture on the ground. At the same time, use a blow dryer to dry the overall stone floor. If time permits, you can also use natural air drying to maintain the stone surface. Drying

5. Spray K2 and K3 potion evenly on the ground while using a marble polishing machine to grind it. Use a cleaning machine with a red scouring pad to sprinkle K2 and K3 potion with an equal amount of water on the ground. Use a 175 rpm floor mopping machine with a load of 45KG to start grinding. The effect of heat energy will cause the crystal surface material to crystallize on the stone surface to form a surface effect

6. Overall floor maintenance treatment: If the voids are large The stone (sandstone, travertine, etc.) must be painted with marble protective agent. After 12 hours, use a floor scrubber to alternately complete K2 and K3 potion grinding on the ground, that is, K2-K3-K2-K3-K2** * Five times, then replace with a white polishing pad, spray a small amount of K1 solution, and polish again to increase the crystal surface hardness of the entire floor

7. Floor cleaning and maintenance: When the stone surface forms After the crystal is mirrored, use a vacuum cleaner to suck away the residue and moisture on the ground, and finally use a polishing pad to polish it so that the entire ground is completely dry and as bright as a mirror. If it is partially damaged, you can perform local maintenance. After the construction is completed, you can walk on it at any time.

These are all methods of stone renovation. At that time, stone maintenance consisted of doing different daily cleaning tasks on it every day, and regular dust removal to keep the stone surface clean. Do not use black wax pad for polishing. After each work, remember to clean and organize the tools for next use. Pay special attention to the scouring pads and stainless steel silk cotton pads, which need to be kept clean frequently to ensure normal performance.