Job responsibilities of packers

Lead: Before packaging, listen carefully to the explanation of quality requirements of product packaging by quality inspectors and team leaders, and cooperate with production preparation. The following are the responsibilities of the packers that I have sorted out and shared with you. Welcome to read the reference.

1, packer's responsibility 1, with health certificate.

2. Obey the arrangement of the workshop director. Abide by labor discipline and correctly master the use of packaging equipment in strict accordance with operating procedures. Improve self-protection awareness and always focus on safety in production.

3. Work clothes, work hat and work shoes must be worn when going to work. You must wash your hands often and dress neatly.

4. Seriously study the product quality requirements, do a good job of self-inspection and mutual inspection, strictly control the quality, and pick out the obviously defective products in time.

5, according to the packaging quality requirements, operate, master the packaging technology, master the technical essentials, and ensure the product quality.

6. When packaging products, please pay attention to quantity, not reduction, and put the product pattern in a unified direction. After packaging, put in the "certificate" before sealing.

7, use tape in the process of packaging, sealing tape should not be too long and too short. Other ways also refer to this law.

8. Employees are prohibited from drinking, smoking, playing, chatting, visiting posts and doing things unrelated to work during work.

9, do a good job in the health of their respective work areas, do clean sanitation before and after work, keep the equipment clean.

10, take care of packaging equipment and facilities. Maintain the equipment regularly.

1 1. In violation of the above terms, 50 yuan will be fined, and another penalty will be imposed under special circumstances.

2. Job responsibilities of packer 1. Implement the "three-inspection system" of self-inspection, mutual inspection and strict inspection by inspectors to ensure the packaging quality of 350 ml and 598 ml bottled water and ensure that a certain stock can meet the market demand.

Second, after the completion of code spraying, the semi-finished products packaged as above should be carefully selected, and the bottles with poor quality, unqualified code spraying and suspended matter in the water should be properly handled as required.

Third, when labeling, carefully select trademarks, and remove those with different heights at both ends, blurred handwriting patterns and no glue at the mouth. Trademarks should be affixed to the standard height. Note that the logo should be aligned with the logo pattern on the bottle, and both ends should be aligned.

Four, product packaging, be sure to clear the number, put the trademark pattern on the bottle, in the same direction. After packaging, the inspector can put it in the "certificate" before sealing the box.

Five, the correct use of tape, glue stick and welding torch for packaging. When sealing, the upper and lower sealing belts should not be too short or too long, and both ends should be folded in half by 2-3 cm. When the welding torch is used up and there is residual heat, it should be placed on the bracket. After completion, take out the remaining glue stick in the welding torch in time.

Six, the workplace should always clean up the packaging waste, do a good job in health standardization and civilized production.

Seven, carefully hand over the number of finished products of various varieties, the number of unqualified spray codes, the number of soft bottles, and the use of packaging materials should be handed over clearly.

3. Job responsibilities of packer 1. In the work, we must obey the unified deployment of the workshop, as well as the guidance and arrangement of the squad leader and quality inspection, and do our job well.

Second, the packers need to go to work one hour in advance to prepare for the handover. Stack the collected packaging materials (such as cartons, tapes, etc.). ) neatly placed on both sides of the packaging table, don't put it at will.

Three, product packaging must meet the quality requirements, be neat, beautiful, generous, angular.

Four, packaging, should be handled with care, protect the glaze and corners intact, do not take the product to vent their emotions, throw it around.

5. When the production line breaks down, the packers must help each other to pack, so as to avoid too many bricks when adding bricks, which will scratch the product or damage the glaze.

Six, each class of products must be packed before work, can not be left to the next class.

Seven, keep the site clean and tidy, packing glue rope, paper ball should be rolled into a ball, in the designated position, not the place, so as not to cause unnecessary harm.

Eight, strictly abide by labor discipline, the implementation of leave system, obey the management system of management personnel.

;