Characteristics of Sika Floor Paint Matters needing attention of Sika Floor Paint

Sika floor paint is a very common decoration material, which can prevent static electricity, dust and corrosion. It is mostly used in basements and garages to make the ground smooth, easy to clean and prolong the service life. Sika floor paint is a good brand of floor paint with good environmental protection. The characteristics of Sika floor paint are introduced in detail below. What are the precautions for Sika floor paint?

First, the characteristics of Sika floor paint

1, bright, epoxy floor has always been flat and bright as a selling point since it came out. There are all kinds of handicrafts, not to mention colorful ones. And because it is made of colored sand, the color is unchanged, and it is humanized and harmonious according to the owner's hobby.

2. The epoxy floor has been real in China for more than ten years, and the laying area is incalculable. Epoxy floor, all materials, quality, quantity, proportion, clear and strict, there can be no falsehood, construction technology specifications and standards, there can be no carelessness, the owner can immediately reflect the effect.

3. Humanization. The epoxy floor is not only made of clear materials, but also genuine, and the trust between the owner and the construction party is easier to establish. Although the construction technology is strict and the process is clear, it is simple. The product design fully embodies the construction scheme for users and is very humanized.

Two. Matters needing attention of sika floor paint

1. Newly poured concrete floor: concrete is mainly composed of cement, sand, stone and gypsum. High water absorption, strong alkalinity and slow drying. The surface pan-alkali and water absorption of fresh concrete are the key factors affecting the coating quality. So dry it for a long time before applying it. Unless the water is specially reduced, it is generally required to dry for more than 28 days, and the water content of the base surface should be less than 6%. If necessary, the surface should be thoroughly removed and neutralized. The strength of concrete should be above C25. The ground flatness shall be checked by 2m guiding rule, and the clearance shall not be greater than 3mm.

2. Key points of floor paint: The self-leveling performance of floor paint mainly refers to the top coat, and the primer and middle coat are the same as other floors. Self-leveling topcoat is the key to the appearance and application effect of epoxy self-leveling floor. The construction of epoxy self-leveling topcoat mainly takes the form of trowel scraping, and the self-leveling topcoat is gently driven by the tooth edge of trowel to generate a little power, and then the self-leveling topcoat is self-leveling. In construction, temperature, construction method and construction skills directly affect the effect of epoxy self-leveling floor.

3, the coating should not be too thick, so as not to cause problems such as slow drying and easy foaming. Building coatings should be mixed with curing agent in strict accordance with the construction ratio, then mixed with diluent, filtered and placed around 15 for construction. The mixed solution needs to be used up within 4 hours to prevent the performance from being affected.

4. The prepared coating will gradually thicken during the construction process, and an appropriate amount of diluent should be added to prevent disadvantages such as poor leveling and foaming; Each coat (especially thick coating) must wait until the paint is dry and polished, and the next coat should be carried out after the painting interval exceeds 24 hours.

The content of the above article is the characteristics of Sika floor paint and the matters needing attention of Sika floor paint introduced by Bian Xiao in this issue.