Maintenance and explanation of large inclination conveyor belt and corrugated edge conveyor belt

1. When transporting and storing seeds, the conveyor belt should be kept clean to avoid exposure to sunlight, rain and snow, acid, alkali oil, organic solvents and other substances, and stay away from the heating device for one meter. 2. During storage, the temperature in the warehouse should be kept at-18℃-40℃, and the relative temperature should be kept at 50-80%RH. 3. During storage, the products shall be placed in rolls and shall not be folded. During storage, they shall be turned over once every quarter. 4. Conveyor belts of different models and specifications should not be used together, and their joints should be glued. 5. The type, structure, specifications and number of layers of the conveyor belt should be reasonably selected according to the use conditions. 6. Under normal circumstances, the running speed of the conveyor belt should not be greater than 2.5 m/s, and the materials with large size and large wear should be as low as possible. 7. According to the design regulations of the conveyor, the diameter of the driving roller of the conveyor, the gap of the material distribution of the conveyor belt, the matching between the back roller and the reversing roller and the requirements for the groove angle of the idler should be reasonably selected. 8. The feeding direction should be along the running direction of the belt. In order to reduce the impact on the belt when the material falls, a chute should be adopted to reduce the falling distance of the material; In the receiving part of the belt, the spacing between rollers should be shortened and buffer rollers should be used. In order to prevent material leakage, a soft and moderate baffle should be used at the belt side, so as to prevent the baffle from being too hard to scratch the belt surface of the conveyor belt.