5. Report in charge of the work.

# Report # Introduction Seeking truth from facts, accurate facts, reasonable analysis and proper details are the keys to writing a good situation report. The following is the report of the work in charge, welcome to read!

1. Responsible for work report

As a school, to implement the refined management of teaching routine, we must first make all teachers and students change their concepts and realize the necessity and importance of implementing refined management, and at the same time realize the burden they shoulder. Refined management: we should get to the point, be practical, have the spirit of getting to the bottom of the matter, find out the root of the problem with the method of detail analysis, and do small things in detail. Fine management is a realm, a business philosophy and a persistence.

First, curriculum management

Existing problems: insufficient attention, weak awareness of law enforcement, school-based curriculum development.

Countermeasures and suggestions: offering courses according to law, strengthening class patrol, timely feedback, focusing on problems, strengthening research, highlighting school-based and forming results.

Second, the system management

Existing problems: the timeliness is not strong, the awareness is not high, the execution is not strong, and the participation is not wide. Countermeasures and suggestions:

1. Improve and revise the system and increase the participation of teachers.

2, the implementation and implementation of the system, strengthen the guidance and implementation of the system.

3. Establish and improve the system to avoid the blind spots and omissions of the system.

Third, lesson preparation management.

There is a problem: check the main document.

Methods: the guidance was lagging behind, the attention was not wide, and the tracking management was weak.

1, according to the requirements, strengthen teachers' self-evaluation, peer exchange and evaluation of teaching and research team leaders.

2. Pay attention to feedback, conduct multi-level and multi-form feedback communication, and track and evaluate the disadvantaged teachers.

3. Strengthen research, organize special guidance and research activities, give full play to collective strength, and realize resource sharing.

Fourth, there are problems in class management.

1, the classroom teaching efficiency is not high.

2. The effectiveness of teaching and research activities is not strong.

Countermeasures and suggestions: the system of attending classes in advance, finishing classes in time, attendance system in class, classroom feedback system, class adjustment system and daily investigation system.

Problems in operation and management of verb (abbreviation of verb)

1, the focus is not wide.

2. The inspection method is single.

3. Insufficient research.

Countermeasures and suggestions:

1, learn about students' homework through multiple channels.

2, clear inspection content, rich inspection form.

3. Strengthen homework teaching research and overall homework planning.

4, increase the intensity of non-test subjects.

VI. Supplementary management issues

1, time-oriented, light method research.

2. Pay more attention to knowledge counseling than emotional input.

3. Emphasis on decentralized guidance and light on overall management.

Countermeasures and suggestions:

1. Strengthen school-level management, and form effective measures to supplement the excellent.

2. The cultivation of students with extraordinary intelligence should not only focus on in-class, but also extend to out-of-class and organize various competitions.

3. Counseling for students with learning difficulties should not only pay attention to individual tutoring after class, but also pay attention to tutoring in class, and carry out case analysis and research on methods and strategies.

Seven, quality management issues

1, the topic of concern is not comprehensive.

2, daily testing does not pay attention.

3. The quality analysis is not in place.

4. Behavior follow-up is not timely.

Countermeasures and suggestions:

1, strengthen the monitoring of non-examination subjects and implement phased examinations.

2. Pay attention to the unit test of examination subjects and implement process management.

3. Strengthen the quality analysis, evaluation and guidance of teachers and teaching and research team leaders,

4. Conduct quality analysis seminars.

5. Intensify efforts to summarize the experience of excellent teachers and find out the reasons for weak teachers, and further solidify and spread the experience.

Eight, the problems in student management

Casual behavior. Extreme personality. Study carelessly. Lack of autonomy.

Countermeasures and suggestions:

1, close the distance and carry out nursing.

2, self-management, shaping personality.

3. Teachers and students strive to promote change.

4. Communicate with parents and grow up healthily.

2. Responsible for work report

I. 20xx Work Summary 1. Participate in the preparation of Inner Mongolia Baotou Steel Bearing Technology Development Co., Ltd., mainly responsible for the approval of various documents and related processes of Baotou Steel and bearing technology.

2. Participate in the trial production of bearing steel smelting in the Iron and Steel Department of Baotou Steel Tube Company and the trial production in bearing steel tube in 159 operation area. Up to now, * * has trial-produced and smelted 20 heats of GCr 15 bearing steel, and rolled 2 14 tons of bearing steel tube. The quality index and oxygen content of smelting bearing steel are not up to standard, and the stability is not good. Measures are being taken to improve it in many ways. By changing to blank rolling and increasing the heating temperature, the bearing tube meets the standard requirements. At present, we are cooperating with Luoyang Bearing Group to process bearing rings with hot-rolled bearing tubes.

3. According to the relevant product standards, the technical agreement for hot rolling seamless bearing steel tube and bearing steel was made, and the above agreement was signed with Baotou Steel Pipe Company.

4. Coordinate the steel pipe company to outsource special steel to process round steel. Up to now, * * * has produced bearing round steel 1.6 million tons and delivered 900 tons of round steel.

5. Participate in the pricing of bearing round steel and bearing steel tube in steel pipe company. Communicate and cooperate with many departments, and cooperate with the materials of Special Steel Company to complete all aspects of business work of railway transportation of processed products of Steel Pipe Company.

6. Assist the general manager of the company to handle various business and official duties with Baotou Steel, coordinate business exchanges between various departments and Baotou Steel Bearing Technology, and work hard for the company's development.

Two. 20xx work plan

1. Assist the general manager to carry out all the work of the company.

2. Coordinate with the steel pipe company to continue the trial production of bearing steel, and try out qualified high-quality bearing steel as soon as possible. Cooperate with steel pipe company to optimize the rolling process of bearing tubes, provide high-quality raw materials for hot-rolled bearing tubes for bearing industry, and promote the popularization of hot-rolled bearing tubes in bearing steel tube.

3. Under the leadership of the company, complete the lease transformation of the production workshop, and start trial production and full-scale formal production after the purchased equipment is in place. Add 14 bearing ring production line.

4. Accelerate the construction of hot rolling bearing steel tube+cold rolling bearing ring project, including plant leasing, equipment procurement, personnel recruitment, cooperation and other matters.

5. Establish and improve various production management systems, establish and improve quality management systems and safety management systems to ensure the smooth production of the company.

6. Be conscientious, do a good job in your own charge and work hard for the benign operation and development of the company.

3. Be responsible for the work report

Safety work is a long-term and arduous task, which must be constantly grasped. The first-grade students in primary school have a weak sense of safety, but because of their young age, they are full of freshness to everything around them, so danger is always present. The situation of one semester is summarized as follows: 1. Safety knowledge learning.

The head teacher is responsible for the safety of the children in the class, so he must have certain safety knowledge, so as to educate the students more timely and effectively and deal with emergencies. Through the study of safety knowledge, we can make clear the importance of safety work and the necessity of safety education. At the same time, in the usual education and teaching work, we should know fairly well, carefully observe all possible security risks, and be calm, correct and orderly in the face of some emergencies.

Second, cultivate students' safety awareness.

Educate students not to play dangerous games at school, and walk on the right side of the road, not to play on the road; Go home on time. Often educate students to pay attention to food hygiene education, don't drink raw water and don't eat spoiled food.

Third, cultivate students' habit of observing discipline.

There is a special child in our class. He can't sit in a chair in class. He squats in a chair in every class. It is difficult to cultivate his behavior habits. First of all, I often remind her that I often use classes to educate her to observe classroom discipline. In class at ordinary times, if you find a classmate or a group doing well, praise it in time and set an example in class. Find bad phenomena and correct them in time, and gradually form a class management model that allows students to manage themselves.

Fourth, carry out colorful educational activities.

1, explain safety knowledge to students through class meetings and activity classes.

Through explanation, demonstration and training, students are educated on safety precautions, so that students can receive systematic safety knowledge and skills education on drowning prevention, traffic accident prevention, electric shock prevention, food poisoning prevention, disease prevention, sports injury prevention, fire prevention, theft prevention, earthquake prevention, fraud prevention and gas poisoning prevention.

2. Various safety education is also carried out in the form of school radio, blackboard newspaper and theme class meetings and knowledge contests.

3. Enhance parents' safety awareness by telling them the book. Improve students' safety awareness, safety prevention ability and self-protection ability through education. Students are forbidden to chase, fight and crowd in classrooms, corridors and stairs; Students are forbidden to ride bicycles, climb fences, doors and windows, and do dangerous actions in the school.

4. Educate students to get parents' consent when going out, and don't go out without permission. Educate students to abide by traffic laws and pay attention to safety on the way back and forth.

5. Students' traffic safety education: explain basic traffic safety knowledge to students, such as crossing the road and walking on the sidewalk, watching traffic lights, etc.

6. Students' food safety education: it mainly includes the education of students' usual dietary hygiene habits, buying legal food, and not buying inferior snacks without trademarks and production dates.

7. Students' personal safety education: Students lack the ability to distinguish external things, so the personal safety education for students mainly includes not casually chatting up strangers and not staying in school or the street after school.

8, do a good job in the morning and afternoon inspection, to prevent the occurrence of various infectious diseases and epidemics, improve the file.

9. Safety knowledge contest. In the class, the safety knowledge contest is held in groups. Hold a security handwritten newspaper competition.

In a word, safety work will be a long-term and arduous task. We must put safety education at the top of all our work and persist in it for a long time to lay a solid foundation for our teaching work.

4. Responsible for work report

In 20xx, under the correct leadership of the new team of Sanhuan Company, our company has always put safety in production at the top of its work, earnestly implemented the responsibility system for safety in production, worked hard to learn safety knowledge, and achieved good results through the process management of "inspection, rectification, consolidation and improvement" and the key safety precautions of "fire prevention, theft prevention and traffic accident prevention". The company did not have any unsafe phenomena throughout the year, and successfully completed the annual safety indicators. 1. Learning: I can actively participate in the regular safety production meeting and other safety production analysis meetings held by the head office, carefully record the contents of the meeting, and timely convey and implement the spirit of the safety meeting at the higher level; Self-study traffic safety regulations and electric power safety regulations, learn management knowledge and improve management level; Learn relevant laws and regulations to lay a good theoretical foundation for safe operation. Drawing lessons from the safety experience of brother units and combining with the actual situation of the company, educating employees to pay attention to the safety foundation, forming a good atmosphere in which everyone cares about safety, everyone attaches importance to safety, and everyone does a good job in safety. It is not a problem to ensure safety ideologically.

2. Organization: Strengthen the construction of safety production organization, and set up Luo An with me as the team leader, in charge of managers, safety officers, department heads and other members. Divide the safety responsibility areas within the company's jurisdiction, implement the person responsible for fire prevention and theft prevention, formulate clear safety responsibilities and tasks, decompose them layer by layer, assign responsibilities to people, fully implement the safety production responsibility system, and ensure safety in organization.

Third, hardware: strengthen investment in security and provide hardware guarantee for security. In order to ensure fire safety, according to the company's safety requirements, I arranged for the company's safety personnel to check the safety points, newly purchased some fire-fighting equipment, and replaced and supplemented key fire-fighting places such as offices, shopping malls and warehouses. Repair the security door four times, add three monitoring cameras, add a set of leakage switch, and equip a safety coordinator to ensure safety in hardware.

Fourth, training: strengthen safety training and education to enhance employees' safety awareness. Safety education and training were focused on new personnel and special post personnel, and some of them had written tests. All new employees should receive safety training according to the nature of their posts. For example, store operators are trained in fire prevention and theft prevention, and maintenance personnel are trained in traffic safety and low-voltage electric shock prevention when going out, so that on the one hand, they can establish safety awareness, on the other hand, they know their own safety responsibilities, and there is no problem in ensuring safety in skills.

Verb (abbreviation of verb) supervision: strengthen inspection and supervision, rectify and investigate potential safety hazards. According to the regulations of the company and the requirements of the head office, all positions and links of the personnel are inspected in an all-round and whole process, potential safety hazards are discovered and eliminated in time, and existing problems are seriously rectified, so as to plan ahead and nip in the bud. At the same time, strengthen supervision, improve the effectiveness and closed loop of safety management, and ensure that there is no problem in supervision.

The key work of intransitive verbs: highlight the key points of safety and formulate targeted measures. Fire prevention, theft prevention and traffic accident prevention are the three major safety priorities of our company. In normal work, employees are required to take the three major safety priorities as the top priority of the company's safety work. And made a detailed subordinate to each security key, asking questions one by one to ensure that the key works without problems.

1, to prevent fire accidents. The trading company is an enterprise mainly facing the external market, with diversified business varieties, such as air conditioners, computers, books and other products, which have high requirements for fire prevention. This is especially true for books. In view of this situation, I have made careful arrangements in my work, set up full-time firefighters, formulated fire prevention plans, publicized and trained fire prevention knowledge, and conducted fire drills, so that employees have mastered the knowledge and skills to deal with emergencies.

2. Prevent theft accidents. In order to ensure the safety of the company's property and prevent theft accidents, according to the current public security situation in Fuyang and the company's own characteristics, I called the relevant personnel of the company to study and formulate a series of anti-theft safety measures and adopted some effective methods. Air-conditioning specialty stores, computer specialty stores and book mall have installed illegal intrusion alarm systems connected with 1 10 respectively, and real-time monitoring systems have been installed in places where problems are prone to occur in book mall, effectively preventing theft and ensuring the safety of company property.

3. Prevent traffic accidents. Traffic accident is one of the important factors affecting the safety of our company. Good safety awareness and necessary safety measures are important means to ensure traffic safety. In order to ensure traffic safety, I have taken first-line measures in the management and dispatching of the company's vehicles: First, drivers are required to establish a good sense of safety at ordinary times, not to drive at high speed, not to wear a seat belt when driving, not to drink, not to answer the phone, and not to drive in bad weather; The second is to strengthen the maintenance and daily maintenance of vehicles. Combined with the inspection of higher authorities, our two delivery trucks are regularly sent to the designated maintenance point Hengli Company for inspection, and some hidden dangers are found and eliminated in time. Third, it is required that the car-using unit must fill out the dispatch order before leaving the car, indicating the time and task of leaving the car, and the manager can sign it before leaving the car.

4. Prevent falling accidents. Because one of the business projects of the trading company is the sales and installation of air conditioners, there is a situation of working at high altitude, so preventing falling from high altitude is an important safety link of our company. First of all, I have strict requirements for after-sales installation and maintenance personnel, strengthen the safety knowledge training of aerial work, sign a safety construction agreement, and require the after-sales director to arrange safety precautions and take safety measures according to the site conditions before dispatching each time. Secondly, carefully check the equipment and use of safety instruments, requiring comprehensive equipment, qualified quality, regular inspection and standardized use, so that there is no problem in every link. In order to ensure the safety of air-conditioning installation once and for all, with the approval of Sanhuan Corporation, the air-conditioning installation and maintenance service industry of the company was outsourced from 20xx, that is, a legal person enterprise with installation service capacity was entrusted to provide after-sales service instead of our company, which eliminated a series of safety problems such as air-conditioning aerial work.

Through one year's efforts, our company has achieved good results in key all-round working faces. No safety problems have occurred throughout the year, and potential safety hazards have been eliminated in time, providing a stable environment for the normal operation of the company. In the year of 20xx, I will make persistent efforts, always grasp the concept of "safety is benefit", make the safety work more solid and stable, do not relax my vigilance, be careless and take chances, and make the company's safety work to a higher level.

5. Be responsible for work report

In 20xx, our company earnestly implemented the policy of "safety first, prevention first", earnestly implemented various safety measures, insisted that safety work is the basis of all work, strengthened safety education and training for employees, improved and implemented safety organization system, operation monitoring means and various safety technical measures, paid close attention to the implementation of safety rules and regulations, and comprehensively promoted safety standardization. The work of the whole year is summarized as follows: First, do a good job in safety education and training, and lay a solid foundation for safety.

Improving employees' safety culture quality, basic theory and basic skills is the basis and important goal of doing a good job in safety production and building enterprise safety culture. The company mainly strengthens employees' safety awareness and cultivates safety culture and concept from the following two aspects.

1. Organize employees to carry out education and training on safety ideas, safety systems and safety technologies in a planned way, and constantly improve employees' safety skills and safety awareness.

In terms of safety education, the company strictly implements the "three-level safety education" and conducts factory-level education for new employees as required. At the same time, supervise and inspect the secondary and tertiary safety education, so that they can be familiar with and master the necessary safety technical knowledge and self-protection skills, and can only take up their posts after meeting the requirements. For those who have changed jobs, changed production and returned to work, all workshops have been trained in safety skills and post operation methods as required, and they can only take up their posts after passing the examination. The safety assessment results are one of the basis for employees' promotion. According to the principle of "whoever is in charge is responsible, whoever uses it is responsible", the outsourced workers can only enter the factory after passing the safety training. Foreign interns and visitors are not allowed to enter the production area before receiving safety education and completing relevant procedures.

Second, carefully organize various safety activities, build the company's safety culture, and strengthen employees' safety awareness.

1, seriously carry out the "anti-three violations" activities, and put an end to people's unsafe behavior. The company has established a relatively perfect safety responsibility system. The day shift is led by company leaders, and middle-level cadres, safety officers, mechanics and electricians take turns to be on duty at night. They are specifically responsible for the daily duty work, timely rectify the feedback when problems are found, and insist on this work as a basic work of safety management for a long time. Firmly grasp the theme of "people-oriented, safety first", earnestly carry out the activities of "checking hidden dangers, loopholes and problems" and "anti-violation, anti-violation and anti-violation", actively check and fill safety management problems and loopholes, seriously organize employees to discuss accident cases that have occurred in recent years, learn safety management systems and safety operation procedures, increase penalties for violations and disciplines, strengthen safety management, and comprehensively improve the safety quality of employees.

2. Actively organize "Safety Production Month" activities, and create a cultural atmosphere of "paying attention to safety and caring for life" in combination with the company's safety production status. Carry out the superior documents and the spirit of the meeting, strengthen safety management, increase publicity, comprehensively improve employees' safety awareness, and implement various safety work.

3, organize the team backbone to go out to visit and study, improve the management level at the grass-roots level. On July 10, Wang Cheng, deputy general manager of the company, led a group of 35 people including the company monitor, section chief manager and office staff to visit and study in Huai 'an. Accompanied by Zhang Lihua, deputy director of Huai 'an Safety Supervision Bureau, the delegation visited Jiangsu Dacheng Pharmaceutical and Chemical Co., Ltd. and had a counterpart exchange with the company. The backbone of the team was inspired by the exchange activities, found the gap and learned the experience. Through visiting and studying, it laid a good foundation for the establishment of "1+3" safety monitoring system in our company.

Two, strengthen the safety management of production site, strengthen the process monitoring.

First, focus on the production site and strictly control dangerous operations.

Over the past year, with the production site as the focus of safety work, we have strengthened the management of people, materials and environment at the site, earnestly implemented the management system for dangerous operations, strengthened the coordination and command of related operations, standardized information communication and cross-regional operation monitoring system, and strictly approved the hot work, equipment maintenance, equipment entry (confined space) and aerial work at the production site, and reviewed them at any time to ensure the safety and controllability of dangerous operations. All kinds of special actions were carried out more than 320 times throughout the year, without any mistakes.

The second is to improve the filing system of driving and parking, and strengthen the monitoring of key parts and dangerous sources (points) of fire safety.

Since the company began to record the start-up and shutdown of production workshops last year, all workshops have done a good job of safety before the start-up and shutdown in strict accordance with the requirements, and relevant functional departments have closely cooperated. Parking was filed this year 18 times. Due to the advanced and meticulous work, the smooth and safe operation of opening and parking is ensured.

Third, the safety work plan for next year.

Next year, the safety work of our factory will, as always, abide by the laws and regulations on safety production, strictly implement the requirements of superiors for safety production, and carry out various safety production work. Conduct safety education and training for employees, strengthen their sense of safety responsibility, and improve their operational skills and safety awareness. Conscientiously implement the safety responsibility, strengthen the management of dangerous chemicals, key devices, key parts and hazard sources, strengthen the monitoring of production process, further improve safety technical measures, rectify all kinds of hidden dangers, improve the occupational health and safety management system, and achieve the annual health and safety objectives.

1. Seriously organize employee safety education and training, publicize and train safety standardization management manual and safety standardization employee manual, and implement various rules, regulations and technical specifications.

The second is to improve the emergency rescue plan system, do a good job in emergency rescue drills, improve emergency support capabilities, and further improve the emergency response capabilities of enterprises.

The third is to improve the safety standardization management system and do a good job in safety standardization responsibility assessment and safety performance assessment.

Do a good job in various safety inspections, conscientiously implement the rectification and management of hidden dangers, and create good conditions for safe production.

Fifth, continue to increase investment in safety, steadily promote the rectification of safe operation projects, and improve the level of intrinsic safety.