How to choose a suitable engineering plastic towing chain?

Engineering plastic towing chain can be divided into bridge plastic towing chain and fully enclosed plastic towing chain according to structure; According to the model, it is divided into small towing chain, general towing chain and large towing chain; According to the noise figure, it can be divided into ordinary towing chain and silent towing chain; According to the form, it can be divided into ordinary towing chain, parallel towing chain and S-type towing chain. According to the raw materials, it is divided into original packaging plastics and recycled plastics. So how to choose a suitable plastic towing chain? Suzhou Jiamari summarized as follows:

1. Selection principle of plastic towing chain: Height: Select the thickest one of the built-in cables, oil pipes, gas pipes and water pipes as the reference height. Plus at least 10% height space as the internal height of the traction chain. When cables, oil pipes, gas pipes and water pipes need to be overlapped, the actual height after overlapping shall be taken as the reference height.

Second, the inner width: choose a thicker cable; The sum of the outer diameters of oil pipes, gas pipes and water pipes. As a reference for the internal width of the towing chain, at least 10% of the width space shall be reserved.

Third, the bending radius: choose the built-in cable; Bending radius of oil pipe, gas pipe, water pipe, etc. As a reference value, and leave more than 10% space.