What is the material of SA5 16Gr70?

SA5 16Gr70 is American standard steel plate, which conforms to ASME standard and belongs to carbon steel plate for medium and low temperature pressure vessels.

Wugang steel works can produce in 2006.

The letter SA5 16Gr70 stands for the implementation of ASME standard starting with "SA", in which "Gr" is the abbreviation of English "Gread" and "CL" is the abbreviation of "CLASS".

Wuyang Steel Sun Fan

Similar brands include

SA5 16Gr70(HIC)，A5 16Gr70(R-HIC)，SA5 16Gr70N-Z 15，SA5 16Gr70N-Z25，SA5 16Gr70N-Z35

SA5 16Gr70 Delivery status: (40mm) Steel plates are usually supplied in rolled state, and normalized or stress-relieved steel plates can also be ordered.

2. thickness >; 1.5 inch (40mm) steel plate shall be normalized.

3. Unless otherwise specified by the Buyer, when notch toughness is required, the steel plate with thickness ≤ 1.5 inch (40mm) shall be normalized.

4. If approved by the Buyer, the cooling rate is allowed to be higher than that in air to improve the toughness, provided that the steel plate is subsequently tempered within the range of 1 100- 1300 degrees Fahrenheit (595-705 degrees Celsius).

Chemical constituents of SA5 16Gr70

C≤0.30，Mn:0.79- 1.30，P≤0.035，S:≤0.035，Si:0. 13-0.45。

SA5 16Gr70 strength grade

American (SI) tensile strength grade ksi(MPa)

55 (380) 55-75 (380-5 15)

60 (4 15) 60-80 (4 15-550)

65 (450) 65-85 (450-585)

70 (485) 70-90 (485-620)

Application of SA5 16Gr70

SA5 16Gr70 is widely used in petroleum, chemical industry, power station, boiler and other industries, and is used to manufacture equipment and components such as reactors, heat exchangers, separators, spherical tanks, gas holders, liquefied gas tanks, pressure shells of nuclear reactors, boiler drums, high-pressure water pipes of hydropower stations, turbine volutes and so on.