Matters needing attention in installation of Xiaomi air purifier Jinan washing machine

1. After the washing machine receives the goods, unpack and take out the fixed foam in the frame, and be sure to take it all away; The three transport screws on the back of the machine must be removed; Because the drum washing machine drains water, the drain pipe must be placed at a height of 60 cm ~ 90 cm; Please ensure that the power socket is grounded before use, otherwise there is danger of electric shock; Drum washing is best placed on the balcony or other places that are not bathrooms, so that its life and health are greatly improved.

2, pay attention to protect electrical insulation, in strict accordance with the requirements to connect the ground wire.

Anyone who uses a two-pin power plug must connect the special grounding wire of the washing machine with the grounding body (angle steel and iron pipe) and bury it in the ground reliably.

Users living in buildings should not connect the ground wire to pipes such as tap water and heating, because

Due to the complexity of the pipeline, the contact resistance at the interface is large and unreliable.

If there is a three hole socket on the wall, the hole in the middle is the ground wire, which is specially used for grounding.

If the equipment is used, it should be reliably connected with the special grounding wire of the washing machine.

3. The washing machine should be placed stably and firmly to avoid shaking or vibration when the machine is working, which will damage the life of parts and increase noise.

Uneven ground may

By adjusting the screw or plug in the bottom corner of the shell and adding a solid washer to make it horizontal.

The washing machine should be placed in a well-ventilated place to avoid direct sunlight as much as possible, which is beneficial to it.

Moisture emission reduces moisture and mildew, protects the insulation performance of electrical parts and metal parts from moisture and corrosion, and prevents the plastic shell from fading and mildew.

, metamorphic deformation.

4. Keep the washing machine as far away from water, power supply and sewage pipes as possible, so as to avoid power supply leads, upper and lower water pipes being too long to interfere with operation and wires.

The insulation of skin soaked in water for a long time is easily destroyed.

The hanging position of machine belt and drain pipe should be convenient, and the middle part of hose should not be twisted and bent.

The connection between the faucet interface and the water inlet of the washing machine should be firm and cannot be forcibly connected, otherwise the joint will collapse when the water flow is large, wasting water.

Spill dirty clothes.

The clothes basin should be placed neatly, and it should not be pressed on the upper part of the cabinet, which will damage some parts of the control panel.

Jinan washing machine