What should be paid attention to in the production safety of ring forgings?

In the production process, it is forbidden to directly remove the scale on the anvil surface by hand or foot. When sweeping scales with compressed air hammer, people are not allowed to stand opposite. Before the hammer stops, it is forbidden to put any part of the body under the hammer to take or put the workpiece or tool. When the clamping fixture and die are replaced or the hammer head and forging are stuck on the forging die, the power supply should be cut off and the work can only be carried out after the support is added. It is forbidden to forge charred blanks below the final forging temperature, so as to avoid forging cracks flying out and hurting people. Do not put hot forgings or tools on the channel. Ring forgings should be placed in the designated place and not piled too high. Forgers must wear the prescribed labor protection articles and wear them according to the prescribed standards before they can start working. Before the ring forgings leave the factory, check whether the relevant electromechanical equipment, molds, tools, auxiliary facilities and hydraulic pipes are safe and reliable, and lubricate the equipment, otherwise they are not allowed to be used. The ring forging factory should preheat the hammer head, hammer rod, die and tools before work. It is forbidden to throw materials at a long distance, and protective baffles should be added for throwing materials at close range. The blank of ring forgings should not be thrown from the sidewalk. For large ring forgings, they must be clamped firmly with pliers and transported by crane. Manual forging is carried out on the anvil with manual forging tools and relying on manual strike, which is labor intensive. At present, it is only used for parts repair and tool reassembly. Machine forging is carried out with forging tools on various forging equipment. According to the different equipment and tools used, machine forging can be divided into four categories: free forging, die forging, tire die forging and special forging. If you still don't understand, please contact Yongxin Sheng Forging Factory.