What are the advantages of plastic doors? What are the key points in choosing blister door?

There are many kinds of cupboard door materials now, and the plastic sheet is also recognized by everyone because of its good quality. When it is used at home, it is not afraid of moisture and water, so the use effect is very satisfactory, but it has many advantages. Let's take a look at the advantages of plastic doors. This will be of great help to our choice.

1. What are the advantages of plastic doors?

1, from the product point of view, pvc film skin on the surface of plastic door panel. Also know that the color and texture displayed by the door panel of the plastic suction cabinet are certain. So there should be countless colors in theory. The color and texture of plastic door panels are rich, and the selection surface is large to meet your needs. The surface of the plastic door panel can also generate various three-dimensional shapes, which are scratch-resistant and wear-resistant.

2. There is also a plastic door panel. Although it is an excellent cabinet door panel, you must understand it. However, there is a shortcoming that can't be covered up anyway, that is, the deformation of the door panel of the plastic suction cabinet. Because the manufacturing process is hot pressing, it is inevitable to expand with heat and contract with cold. After cooling, the plastic sheet will sag towards the PVC film to varying degrees (the greater the quality of the substrate, the further development of the plastic sheet door.

Second, what are the main points of choosing blister door?

1, the first is the method to distinguish the quality of the base material: the quality of the base material directly determines whether the cabinet door panel has the ability to eat nails twice, which must be considered, including the nail holding ability, the deformation degree of the finished plastic sheet and the environmental protection performance of the finished plastic sheet. The density of a good plastic door panel substrate is different from that of a common substrate. The best way to distinguish is to choose small pieces of the same size and weigh them, so that the nail holding ability will be better and the deformation will be smaller.

2. There is another way to distinguish the quality of the film: the quality of the film directly determines the grade and quality of the finished plastic door panel. Use performance. A good plastic film should reach a certain thickness, with uniform adhesion and stable color. If the thickness of PVC film is low, the surface will appear white and orange peel when covering the corners. In order to cope with these two phenomena, some manufacturers choose to reduce the pressure of plastic suction machine, but they can't guarantee the adhesion between PVC film skin and substrate.

3. What's more, the main problem caused by the uneven back glue of the film skin is that the PVC film skin and the substrate can't be pressed normally. It is very important that the PVC film itself can't be pressed by a plastic suction machine, so it must be rolled on the back during production. We call it back glue, whether the back glue is uniform or not, otherwise it is likely to fade in the process of wiping in normal use.

4. Finally, the workmanship of plastic door panels: this is the most troublesome problem in the use process. Must be treated, mainly in the adsorption corner, if there is a phenomenon of glue opening, then the plastic cabinet door panel may absorb water and deform during use, and the PVC film itself will crack. When choosing, you can use your fingernail to dig the part where the PVC film sticks to the plate with a little force, so that there will be no phenomenon of digging down with a little force.

Bian Xiao introduced the advantages of plastic doors, so that we can have a clear understanding of them when choosing this kind of doors.