# Steel bar copying# It’s not easy to do this now

A brief discussion on why steel bar replicas are so hard to find

To put it simply, steel bar replicas are to translate the project based on the construction drawings, the relevant national specifications, and the actual conditions of the project. The processing style of each steel bar of the component; to be serious, 1. It needs to be familiar with the relevant national specification atlas but has a certain degree of flexibility; 2. It needs to be familiar with the structure of each node of the entire project (such as the cross-sectional size of the beam, The thickness and elevation of the board, all line styles of the exterior wall decoration, door frame wall hole dimensions, etc.); 3. It needs to be familiar with the specific properties of each component (such as concrete markings, earthquake resistance levels, etc.); 4. It needs to read the drawings carefully Each digital text information of the design; 5. It needs to be familiar with other more situations of project construction (such as construction sequence, post-casting sequence, construction conditions, etc.); 6. It needs to understand the project management status (such as business planning goals, etc.).

With the state's macro-control of the construction market, the construction market has been compressed, and the pessimistic phenomenon of too many people and too few people in the construction market has taken shape. Some construction companies have risen to the challenge, deepened reforms, and focused on three major projects. For one of the materials - steel bars, the project is implemented to independently re-sample, which effectively avoids random waste and loss of control of the steel purchase plan due to labor re-sampling, and wins a superior competitive space for the development of the enterprise.

However, today, when social and educational conditions are getting better and better, and the construction market is getting more and more compressed, why is it so difficult to find a steel bar sample turner? Why are many companies even offering attractive high-salary packages, but the reinforcing bar rebar position is always vacant?

I have made a brief analysis based on my working experience of more than ten years and the opinions of some friends who have changed the pattern. I hope it will be helpful to enterprises that are interested in reforming. I hope everyone can fully understand the work of reinforcing the steel bar and understand it. Reinforcement rebar renovators allow steel rebar remodeling to better serve enterprises and society.

First of all, recruiters cleverly create too many names to make job seekers "give up": Some recruiters like to rack their brains and do their best to list numerous job responsibilities to make job seekers "face difficulties". And retreat”.

Those who turn steel bar patterns are humans, not gods, and they don’t have three heads and six arms. Although they can turn over well, they will be familiar with the relevant structures and methods of the project. However, bumps and bumps will inevitably occur during the on-site construction management process. Unreasonable troubles may even occur. Therefore, if you fully participate in on-site management, you will not have the peace of mind to do steel bar proofing. Steel bar proofing is a job that requires preciseness of the style of each steel bar, which often leads to errors and omissions, affecting the quality of steel bars. On-site construction acceptance may even affect structural safety. Everyone who designs the steel bars is "well aware" of these situations, so those who design the steel bars will naturally "give up on the difficulties".

Secondly, the threshold is too high, which makes job seekers "daunted": Companies seem to have a common habit of recruiting steel bar samples - that is, requiring a college degree and a bachelor's degree, which makes job seekers "daunted".

Although steel bar pattern making is a relatively high-end technical job, the status of the pattern makers is very low, and there is less room for promotion. Job seekers with high diplomas naturally look down on such positions; Besides, steel bar turning is a special job. Without three to five years of on-site construction, it is difficult to do a good job in steel bar turning. Those who can go through on-site construction are basically farmers with low diplomas. work. Faced with the requirement of a high diploma, they can only "fail and sigh in despair".

Third, poor project management resulted in the failure of the steel bar sample turning to achieve the expected purpose, resulting in frequent replacement of sample turning personnel or the resignation of the sample turning personnel in frustration.

The status of steel bar re-turners is low and they face many problems at work. Many problems raised are often not taken seriously, forming a vicious circle, which not only causes work pressure but also affects production efficiency. It is easy for rebar re-turners to leave their jobs in frustration. Or the phenomenon of frequent replacement of personnel in enterprises.

Fourth, the deterioration of drawing design capabilities has led to the loss of sample copying personnel; the sample copying work is complicated and hard, and there are few replacement sample copying personnel.

The design of engineering drawings is becoming more and more non-standard and full of errors; and the beautifying publicity of copycat software companies, using standard drawings as demonstrations, makes corporate managers shine, which can easily lead to serious deviations between reality and expectations. It makes those who have done the same thing feel disgraced and even doubt their own IQ, so they have no choice but to quit the industry. Because of the special nature of steel bar remodeling, most people are not willing to endure the hardship to participate, resulting in a shortage of replacement personnel.

Doing a good job in reproducing steel bars can, in a small way, reasonably save engineering steel bars, ensure smooth construction acceptance, and create benefits for enterprises; in a big way, it can effectively avoid the random waste of national defense strategic resources and protect national defense. construction. But even if the steel-reinforced man is the powerful Sun Wukong, without the Tathagata to subdue the six-eared macaque, tame the white-bone spirit... and protect Tang Monk from learning the scriptures, it will still be difficult to move forward!

From Zhongqi user: Mr. Zhou

Mainly fishing in troubled waters, knowing too much, and the old sampler is unemployed.

From ZhiQ user: Mr. Shao