Excuse me, how does the dyeing factory follow the documentary process?

First of all, before the merchandiser starts to work, the following information should be prepared:

1. The color is the same.

2. The original feel is the same.

3. The sample confirmed by the customer (i.e. the first color sample printed by the factory).

4. Original quality samples.

5. A copy of the contract (indicating quality requirements, standards, delivery date, quantity, etc.). There are factories on it, and the documentary can be referenced).

6. and related information.

Second, the factory makes color samples: Documentaries need to do the following things:

1. According to the color of samples (primary color samples) provided by customers, factory lofting is required, and there must be a written request for lofting, that is, a notice of coloring, which includes (color matching light source, color fastness, environmental protection of dyes, number of samples, size of proofing grey cloth, specifications of proofing grey cloth, completion time) and so on.

2. Proofing grey cloth: Proofing grey cloth is consistent with bulk goods, and it is forbidden to use grey cloth of other specifications for proofing. According to the production characteristics of bulk goods, it is necessary to consider whether the sample grey cloth should be processed.

3. According to the proofing notice, use the light source correctly (such as D65, TL84, U3000, etc.). ) avoid lamp jumping and improve proofing accuracy.

4. According to the customer's requirements, the sample size and version number must be indicated on the proofing notice (yarn samples should be marked for yarn-dyed samples, and four samples of A, B, C and D are basically printed for chemical fiber yarn-dyed fabrics).

5. Time requirement: dye beaker samples for 3 days, and yarn-dyed samples for 10 days. Special circumstances shall be handled as appropriate.

6. Description: The sample must be pasted (company color sample card) in the specified form, and the color number, color name, number, sample delivery date, etc. shall be indicated. Instructions should be given according to the proofing notice.

7. Color sample card management: keep it properly to prevent leg color, keep the number away, and look for it whenever you use it.

Three, medium-sized samples or bulk steel cylinder samples (that is, the first production sample before bulk production):

Samples (such as quality samples, feel samples, sample clothes and fabrics, etc.). ) What is provided for medium-sized samples or large goods should be the same as that provided for large goods. If possible, try to imitate the production process of bulk goods, and record the dyeing materials, auxiliaries and technological processes used, especially the width of fabrics. Stretching and setting should be carried out according to the production procedure of bulk goods, and samples provided for medium samples or bulk goods should be reserved for inspection.

Fourth, in the process of producing large commodities:

1. clear requirements: clear the requirements of the order contract, especially the standard requirements and delivery date of internal and external quality.

2. Make production plan: According to the delivery requirements, make fabric production plan and finished product quantity in stages. At the same time, fill in the "Fabric Organization and Production Schedule" and revise it in time every week or every time there are new changes. Then report to the leader of the competent department from time to time. Send it to the supervisor by fax or email.

3. Track the quality of each channel, focusing on:

(1) Whether to paint under the specified light source.

② Whether the samples, confirmation samples or cylinder head samples are correct and consistent.

③ Color difference control: edge difference, head-tail difference, horse difference, yin-yang difference, cylinder difference, etc.

④ warp and weft density, width, color fastness, shrinkage, handle, gram weight, smell, etc.

Verb (abbreviation for verb) Inspection of bulk goods:

4. Inspection standards and methods: According to American AATCC international standards, or GB decimal and quartile inspection methods or internal inspection standards, different inspections must be carried out according to the use of fabrics.

5. Under the specified light source, the confirmed sample shall prevail, and the color difference shall be controlled at Grade 4-5, and shall not be lower than Grade 4. If it exceeds the standard, it must be repaired or redone with new blanks.

3. Appearance quality:

1. Fabric inspection: focus on inspection of stains, weft skew, left, middle and right chromatic aberration, head and tail chromatic aberration, poor hand feeling, warp break, weft break, warp mark, oil stain, colored flower, roving, colored stain and warp weight.

2. Full inspection: width (to be measured three times, head and tail), gram weight (head and tail), warp and weft density, length, color difference,

Packaging requirements for intransitive verbs:

According to different fabric characteristics, it can be packed in pieces or rolls, or packed in plastic bags or snakeskin cosmetic bags. And the shipping mark must indicate: model, color, quantity, cylinder number, color number, date, order number, volume number, etc.

Seven, test the sample cloth 3-5 m to test the relevant physical and chemical performance requirements.

Eight, the factory test OK (according to the requirements of the company's procedures sent to the relevant factory or company warehouse).

9. It is very important to track and check the delivery and quality. Follow-up production: go to the workshop more often and learn from the process managers about the problems encountered in the production of various bulk goods. If necessary, you need to reflect your problems and suggestions to customers or department heads or ask for opinions. ...

Daily work arrangement:

1. Fully prepare and understand the order materials (customer's preparation, production process, final confirmation sample, noodles/accessories sample card, confirmation comments or correction materials, and customer samples can be brought in special circumstances), and confirm whether the manufacturing process details of all materials are unified and detailed. Reflect unclear instructions to relevant technical departments and business departments in detail for timely confirmation.

4. Make sure that all requirements and materials between the company and foreign processing plants are detailed, clear and consistent! (It is best to have written proof)

3. Know the production and operation of the workshop in advance as much as possible, fully evaluate the advantages/disadvantages of the workshop, and be aware of it.

The words, deeds and attitudes of the merchandiser represent our company. Therefore, when dealing with the corresponding business with various business units, we must grasp the basic principles, pay attention to proper words and deeds, and be neither humble nor supercilious. It is strictly forbidden to make excessive words and deeds to customers (or customer company merchandisers) for any subjective or objective reasons. In the process of handling business, you can't arbitrarily express your position beyond your authority. Ask the leaders for decision in time if there is any problem.

5. Fully estimate the possible problems in the work in advance, strengthen the work accordingly, improve and refine the preliminary work, and reduce or even eliminate the possibility of their occurrence. Not for the purpose of finding problems, the fundamental way is to take full precautions in advance, constantly explore in the work, sum up experience in dealing with problems in time, and further improve the working methods and detailed rules in the future work.

6. Order merchandiser should keep close contact with the person in charge of the order (salesman) and communicate more to minimize the problem.

Document considerations:

1: Whether the material is correct.

2. Whether the size is "accurate".

3. Is the cloth wrong?

4. Whether the process is reasonable.

5. Whether the color of the finished product is "correct".

6. Can the grey cloth arrive at the factory according to the scheduled time?

7: Is there a problem with time?

All the behaviors of commodity salesmen represent the corporate image of the whole company, and it is very important to pay attention to the personal and corporate image, no matter from personal words and deeds or things. Be loyal to the company, don't betray the company for personal benefit. When the merchandiser is away, we should pay attention to the orderly life and work, especially to ensure personal safety and to represent the corporate image.