How to use the excavator hammer?

In people's impression, excavators are widely used, such as going up and down rivers, digging, and demolishing buildings. As long as the excavator is replaced with special equipment, it is a new money-making tool, and the hammer is one of the most commonly used equipment for excavators. Broken hammer, also known as gun head, is an indispensable tool in daily work, but as an excavator driver, do you really know how to use broken hammer correctly?

Share the correct usage of the hammer. Using the hammer correctly can effectively improve the crushing efficiency. Improper operation can not only not give full play to the hammer force, but also damage the machine itself, guide the hammer reaction force, and damage the hammer body, excavator bucket and other structural components.

When the drill pipe touches the pressed object, the correct method can be adopted. First of all, it is necessary to confirm whether the stress direction of the drill pipe is perpendicular to the surface of the pressed object. If the surface of drill pipe and the compressed object are inclined, the wear of drill pipe and bushing will be accelerated.

When confirming the direction of the drill pipe, it is time to master the downward pressure of the drill pipe. When the downward pressure of the drill pipe is too large, the equipment may lean forward instantly due to the sudden fracture of the broken object, causing the hammer or fuselage to violently hit the ground and cause damage. When the downward pressure is too small, the broken hammer will empty the hammer. Therefore, when disconnecting, the downward pressure of the drill pipe should be determined, which is affected by the micro-force of the machine body.

In the process of use, tapping the empty hammer is a big taboo. In order to avoid this phenomenon, we should stop hammering when the broken objects are broken. Long-term aimless air strikes may cause unnecessary damage to the broken hammer.

In the process of crushing, the vibration generated by the hammer is quite large, which is likely to loosen the oil pipes and screws of various parts of the excavator. Therefore, we should also observe the condition of the machine while doing the crushing work. If the tubing is found to be loose, the operation should be stopped immediately, and the maintenance should be checked in time to reduce unnecessary losses.

The operation of excavator crushing seems simple, but there are actually many other doorways. In addition to improving work efficiency, we should always pay attention to the damage caused by rolling. Because I am a mechanic who cherishes the machine, I can't see some unnecessary people damaging my excavator. I will share some excavator work in my spare time in the future. Knowledge and experience in the application process. Want to know other matters needing attention when using a hammer, as well as the job-hunting information of excavator drivers wx.5 1pj.cc, go to the driver's market to find it.