How to lock the instruction of four-axis fixture platen in machining center

There are generally two ways to lock the four-axis fixture platen in machining center: pneumatic locking and mechanical locking.

Pneumatic locking is controlled by air cylinder and can be automatically clamped or loosened according to the set value. The specific operation method is as follows:

1. Place the fixture on the workbench of the machine tool and clamp the workpiece in the fixture on the fixture;

2. Adjust the air supply pressure of the pneumatic system, select "Pneumatic Lock" on the operation interface, and wait for the clamping to be completed.

Mechanical locking is to control the clamping of tooling by mechanical device, which needs manual operation. The specific operation method is as follows:

1. Place the fixture on the workbench of the machine tool and clamp the workpiece in the fixture on the fixture;

2. Manually rotate the clamp platen, and tighten the mechanical locking device after reaching the set position to complete the clamping.

It should be noted that different types of machining centers may have different clamping methods and specific operation methods, which should be operated according to the instructions and operation manuals of the machine tool.