How to use the boiler assembled by Xiamen Jinlong Bus?

2. Corn stalks are used as firewood for the stove and placed at the bottom of the stove.

3. Put the corn cob on the corn stalk as firewood to burn coal.

Take a shovel of coal for later use.

5. Make a fire with corn husk and put it in the stove.

6. Add coal as soon as the fire burns.

7. After the coal is put in, close the furnace cover and wait for about 10 minutes to let the coal burn.

8. At this point, the coal has been fully burned and the life of the furnace has been completed.

Extended data:

1, using microcomputer hot water boiler controller, built-in backlight LCD display, boiler operation status at a glance. Press the key to easily complete all operations, and the super display function and control function of the boiler controller are very complete.

2. The user can set the water temperature between 30℃ and 90℃ at will, and the boiler will automatically supply heat to the heating circulation system or provide hot water for bathing and living for the user according to the user's requirements.

3. The high-power boiler adopts step-by-step time-sharing method to control the heating group, and the heating group can be randomly put into or stopped according to the load change, which obviously reduces the impact on the power grid. At the same time, the number of heating sections can also be started and stopped manually, which is convenient for users to adjust the boiler electric power by themselves.