Job Recruitment Website - Job seeking and recruitment - Responsibilities of the position of product development engineer

Responsibilities of the position of product development engineer

The product development engineer is responsible for the product process development and assists the project manager in the trial production of new products and the evaluation and approval of dimensional measurement. The following are the eight job responsibilities of the product development engineer position I brought to you, I hope you will like it!

Job responsibilities of product development engineer 1

Responsibilities:

1. Participate in the feasibility investigation of product projects, draw up structural and functional design schemes and project plans, develop new structures and technologies, and improve product performance and quality;

2. Participate in the detailed design of product structure, parts and assembly process, and establish and maintain relevant documents of BOM/SOP/SPEC;

3. Undertake the development of prototype, debugging and other related technologies;

4. Process analysis and DFMA (Manufacturing and Assembly Design) inspection;

5. Design changes and final approval of molds, samples and parts, as well as mold control of the company;

6. Track other problems in product development and study technical problems;

7. Necessary technical support in mass production stage.

Requirements:

1, bachelor degree or above, major in mechanical design, mold or electronics, or have experience in mechanical and mold technology training;

2. Familiar with the structure and processing technology of plastic/hardware molds, fully understand the characteristics of commonly used materials such as plastic/hardware, and have experience in the development of intelligent equipment and electronic appliances technology is preferred;

3. Excellent analytical and problem-solving skills, strong product structure and material analysis skills, and relevant work experience for more than 3 years;

4. Have experience in product development project management and be able to independently lead the development department or supplier technical team to complete the development project; .

5. Skillfully use design software such as Pro/E and CAD, and be able to independently complete necessary work such as mold drawing, mold trial and mold parting;

6. Excellent execution ability, communication ability, team management ability and thinking analysis ability.

Job responsibilities of product development engineer post 2

Responsibilities:

1, responsible for new product project development management;

2, responsible for the project product quality standards and quality objectives;

3. Be responsible for technical support of product production process;

4. Be responsible for the training and assessment, supervision and improvement of production technology.

Requirements:

1, 28-40 years old, college degree or above, major in mold or machinery;

2. Familiar with mold design principle, product structure design and analysis, hardware production technology and industry quality standards;

3. More than five years working experience in leading product structure design and development; Familiar with the structural design of hardware and plastic products, familiar with plastic, die casting and surface treatment technology;

4. Have successful project development and management experience and strong overall planning ability;

5. Clear thinking, strong hands-on ability and good execution.

Job responsibilities of product development engineer Part III

Responsibilities:

1. Cooperate with business and customer communication to provide on-site experience technical support for customer's early product design.

2. Use 3D software such as Pro/e to review customer drawings, carry out DFM, and skillfully issue reasonable 2D drawings.

3. Be responsible for the whole process of evaluation, quotation, mold opening, trial production and mass production of mobile phone metal products, plastic products and die-casting products.

4. Be responsible for leading DOE in process and process development.

5. Lead to solve problems in the project process.

Job requirements:

1. College degree or above, major in mechanical design, mold design, materials and other related fields.

2. Three years or above project development experience in mobile phone metal products, plastic products and die-casting products.

3. Be familiar with the development process of mobile phone structural parts, and be able to independently follow up the whole process of the project from evaluation to mass production, as well as the problems in the process.

4. Familiar with the stamping process and die structure of mobile phone structural parts, with good quality abnormality analysis ability and problem-solving ability.

5. Be familiar with the processes of metal products, plastic products and die-casting products of mobile phones (such as stamping, numerical control, PVD, electrophoresis, anode, sandblasting, injection molding, die-casting and welding).

Job responsibilities of product development engineer Part IV

Responsibilities:

1. Follow up on-site production;

2. Coordinate and communicate with internal production and sales personnel to confirm product requirements, arrange production and track quality;

3. Data analysis, making professional project summary report;

4. Meet the technical and quality requirements of customers and communicate internally;

5. Write operation standard books and conduct relevant operation training;

6. Strictly accept and complete other tasks assigned by superiors.

Requirements:

1, bachelor degree or above;

2. More than three years working experience in this industry or more than five years working experience in other manufacturing industries outside this industry;

3. Excellent communication skills, serious and responsible, and have the spirit of learning.

Job responsibilities of product development engineer post 5

Responsibilities:

1. According to the company's product demand, prepare the research and development projects, research and development objectives, research and development budget and research and development cycle of new products and new processes, and report them to the company to evaluate their feasibility and requirements;

2. Make an R&D plan according to the R&D project cycle, and each node reports the R&D progress and forms a report;

3. Strictly formulate the R&D plan, complete the design, test and verification of the project, and prepare and submit relevant technical data and working documents on time;

4, responsible for the coordination between departments in the process of research and development;

5. Responsible for the tracking and maintenance of completed projects;

6. Continuously learn the knowledge of new products and technologies in the industry, search and analyze technical information, and provide valuable creative achievements;

7. Be responsible for the progress management of the project and report the progress to the company regularly;

8, do a good job in all kinds of technical data, patents and other knowledge management.

Requirements:

1, bachelor degree or above, major in chemistry, printing, packaging engineering, machinery and other related fields.

At least 2.3 years working experience in packaging industry, and at least 2 years working experience in tinplate packaging industry.

3. Strong data analysis ability, courage to innovate and strong self-management ability.

4. Strong coordination ability and strong pressure resistance.

Job responsibilities of product development engineer post 6

1. Digest product drawings, data and samples, and prepare product quotation BOM, process flow, equipment, molds, fixtures, tooling list and other materials for feasibility review and quotation of new business.

2. Participate in the structural review and manufacturing process feasibility analysis of products independently designed by the company, and put forward review opinions.

3. Participate in the new product development project team and be responsible for the manufacturing engineering development in the new project development process. Assist the project manager to make the overall progress of the project, including the implementation plan of equipment, tooling and molds, the trial production, debugging and approval plan of products. Assist the project manager to complete the project budget.

4. Put forward product-related technical requirements for equipment, tooling and molds, and participate in the selection of equipment, tooling and molds. Approve the design of tooling and dies, track the manufacturing process of equipment and tooling and dies, and participate in the acceptance, installation and debugging of equipment, tooling and dies together with other relevant departments.

5. Participate in the development of raw materials and outsourced parts, sign a technical agreement with the outsourced parts factory, and be responsible for the first piece approval of raw materials and outsourced parts.

6. Provide process and equipment information and assist relevant departments in production layout.

7. Cooperate to complete the preparation of product test outline and submit it to the customer for approval.

8. Be responsible for preparing relevant technical documents before mass production, such as process FMEA, process documents, feature list, BOM and product configuration table.

9. Be responsible for trial production of new products and application of materials.

10. Organize the trial production and summary of new products and solve product problems, and provide approved materials and samples according to customer requirements.

1 1. Complete the contents and documents of the phase review project.

12. Be responsible for introducing, digesting, summarizing and imparting new technologies in the process of new product development.

Job responsibilities of product development engineer post 7

Responsibilities:

1. Responsible for new product development and new product project management; Responsible for new product development and project management.

2. Participate in the structural design of new products; Participate in new product design.

3. Be responsible for the improvement of existing products and the management of improvement process; Responsible for the improvement of existing products.

4. Participate in production technical support and sales technical support. Participate in production technical support and sales technical report.

5. Other tasks assigned by superiors. Other works of the direct supervisor.

Job requirements:

1. Participated in the development of medical devices and was familiar with the new product development process; Participate in medical device development and be familiar with new product development process.

2. Familiar with domestic, European Union, American and other medical device laws and regulations. Familiar with domestic and European and American medical device laws and regulations.

3. Be familiar with the structural characteristics, injection molding process, extrusion process and ultrasonic welding process of injection molded parts. Familiar with plastic structure, injection molding process, extrusion process and ultrasonic process.

4. Understand the ISO 13485 quality management system. Understand ISO 134585 quality control system.

5. Be able to use SolidWorks to draw and design new products. Can draw with Solidworks and design new products.

6. Successful project management experience is preferred. Successful project management experience is preferred.

7. Good English listening, speaking, reading and writing skills. Good English listening, speaking, reading and writing skills.

8. Have the ability of product development. Have the ability of product development.

9. Be able to use Solidworks software to design products. Ability to design new products with Solidworks.

10. Familiar with the structural characteristics and injection process of injection molded parts. Familiar with plastic structure and injection molding process.

1 1. Project management ability (priority). Ability of project management is preferred.

12. Good English listening, speaking, reading and writing skills. Good English listening, speaking, reading and writing skills.

Responsibilities of Product Development Engineer Position 8

Responsibilities:

1. Evaluation of new products and proposals;

2. Responsible for 2D and 3D design of new products, establishment of BOM and ERP, and completion of product introduction and mass production and process improvement;

3. Responsible for the design, manufacture, feasibility analysis, cost analysis and process improvement of new products;

4. Be able to complete the bad analysis of the problems in the trial production of new products and put forward effective improvement plans;

5. Making technical documents of customer identification information;

6. Be able to effectively communicate with customers and provide development/after-sales technical services;

Job requirements:

1. Must have at least 3 years experience in BtB board-to-board or I/O connector development, and 3 years experience in high-speed backplane connector design is preferred, such as SFP, SFP+, QSFP or high-speed BtB board-to-board connector.

2. Full-time college degree or above, major in mechanical, electromechanical and other related fields;

3. Skillfully use engineering design software UG or Pro/E or solidworks.

4. Familiar with basic knowledge such as molds, materials and electricity;

5. Have good communication skills and rich experience in product failure analysis, and be able to prepare technical specifications and product specifications;

Articles related to the responsibilities of product development engineers:

★ 5 samples of responsibilities of PE product engineers.

★ Ten Responsibilities of Product Engineer's Work

★ Product Engineer Post Responsibility Model

★ Responsibilities of product design engineer

★ Job responsibilities of product engineer

★ Excellent example of product technical engineer's job responsibilities

★ Job responsibilities of software engineer

★ Responsibilities of Food R&D Engineer 10

★ What are the responsibilities of the system development engineer?

Responsibilities of Java development engineer

var _ HMT = _ HMT | |[]; (function(){ var hm = document . createelement(" script "); hm.src = "/hm.js? F3 deb 3 e 38843798 ce 8b 6783 fc 0959 c 85 "; var s = document . getelementsbytagname(" script ")[0]; s.parentNode.insertBefore(hm,s); })();