What do you think of the record of Gao Wei dialysis machine?

1. First turn on the power supply, connect solution A, apply dry powder, click dialysis data, dialysate, A 1, and press A2. The following prompt is yes, no, choose yes.

2. Secondly, press the green BV key in the lower left corner and hold the BV key in the green square in the lower right corner for 3 seconds, which will turn gray. When the machine automatically checks this step, the liquid level of the pipeline and the arteriovenous jug should not be too high. Both the arteriovenous jug and the arteriovenous jug are connected with sensors. Remember: both sensor clamps are open. Do not clamp the red clamp at the arterial end of the pipeline. After completing the above steps, press the "dialysate filling button" for a long time.

3. Finally, the machine screen display is qualified. You can input dialysis data, connect the patient, press the "treatment" button, start the blood pump to draw blood, connect the venous line, improve the blood flow, and press "Dialysis Start". The green light above the machine flashes and it is running normally.