Beijing Changle Decoration Beijing Fengtai Decoration Bar Design

(1) When setting up a bar counter indoors, the bar counter must be regarded as a part of the complete space, not just a piece of furniture. Good design can integrate the bar counter into the space.

There are no specific rules for the location of the bar. Designers usually recommend using some odd spaces. If the bar is integrated into the space and regarded as the main part of the space, the route must be carefully considered.

Good design has good guidance and can make living and commuting more comfortable.

(2) The location will of course affect the circuit and water supply and drainage design. Especially when it is far away from the pipe room or the corner of the drainage pipe, drainage becomes a big problem.

The drainage pipe must have a certain inclination angle.

If the bar is located close to the outdoors, you can connect the drainage pipe to the outdoors and drain the water through a separate pipeline; if the pipeline needs to be connected between the pipes and the slope is not enough, the pipe must be installed from the ceiling or wall When the time comes, the construction will be more troublesome and the cost will increase accordingly.

(3) If you want to use high-power-consuming electrical appliances in the bar, such as induction cookers, it is best to design a separate circuit to avoid circuit tripping.

(4) A bar counter built using corners requires at least 90cm of space. There are two heights of bar counters. The single-layer bar counter is about 110cm, and the double-layer bar counter is 80cm and 105cm. There is a gap between them. It must be at least 25cm long before items can be placed on the inner layer.

(5) The depth of the countertop must depend on the function of the bar. The width of the countertop required for just drinking and dining is different. If there are seats prepared in front of the counter, the countertop must protrude from the bar itself, so the depth of the countertop It should be at least 40-60cm. This width is also more convenient for storage under the bar.

(6) How long should the bar be to make it convenient to use? Generally speaking, the smallest sink needs to be 60cm long, and the countertop needs to be 60cm long. The rest can be measured according to your own needs.

(7) When installing a sink on the bar counter, pay attention to the sink. The sink should be a flat-bottomed trough so that cups will not fall over or be damaged. The depth of the sink should be at least 20cm to avoid water splashing everywhere. Splashed and got wet everywhere.

(8) The design of the wine cabinet should pay attention to the convenience of use. The height of each layer should be at least 30-40cm. The part where the wine bottles are placed is best designed to be placed diagonally so that the wine can be flooded. Bottle stoppers can be used to store wine for a longer period of time; the depth of the cabinet should not be too deep, as it would be inconvenient to hold a cup over other objects.

(9) It is best to use wear-resistant materials for the countertop, and veneer is not suitable. The bar with a sink is best to be water-resistant; if the bar uses electrical appliances, fire-resistant materials are the best, like Artificial stone, melamine board, stone, etc. are all ideal materials.