What should I do if the waste is entangled in the work disk when the CNC lathe is working?

What should I do if the waste is entangled in the work disk when the CNC lathe is working? You mean iron filings are wrapped around the chuck!

It is impossible to wrap the chuck by changing the cutting parameters and the angle of the tool to achieve the effect of chip breaking.

Increasing the feed speed, reducing the spindle speed and deepening the chip breaking groove are all beneficial to chip breaking.

If my answer is helpful to you, please adopt it as the best answer in time. Thank you!

The working principle of mj-50 CNC lathe is that the computer in the CNC device processes the information recorded in digital and character coding mode, and then sends instructions such as machine tool feed to the actuator, and the actuator automatically controls various actions needed for machining according to its instructions, such as the movement trajectory, displacement and speed of the tool relative to the workpiece, so as to complete the machining of the workpiece.

How to solve the fault of CNC lathe workbench? When NC lathe processes parts, it often happens that the workbench stops suddenly and the stepping motor dithers. The failure of lathe worktable is generally caused by mechanical failure, and the failure of control system accounts for a few.

At this point, it is necessary to return the workbench to the working origin and restart the machining program. If the workbench is still running to this position and the same fault occurs, it can be roughly determined that it is caused by damage, deformation or foreign body stuck in a certain part of the transmission system.

When this fault occurs, the power supply of the control system should be cut off first, and then the lead screw should be turned manually. If it is found that there is a great resistance when turning to a certain position or it can't turn at all, it is judged that this position is faulty. It is necessary to check and clear whether the gap between the nut and the lead screw or the sliding insert is too tight, whether the lead screw is bent and deformed, whether there is foreign matter in the ball guide groove of the ball screw, whether the flexible gear in the reducer of the stepping motor is loose, and whether there is foreign matter stuck.

Yongkang is looking for a job in CNC lathe. How to find it? Go to the local personnel network, make a resume, and then select some machinery manufacturers and submit resumes.

Also, you can go to the door of someone else's factory and look at the recruitment notice. If there is a CNC position, just go in and ask if you want someone.

Then ask a friend to introduce you.

Is Tianjin CNC lathe easy to find a job? It's easy to find the development zone. It would be better if you could speak a foreign language. There is a good chance of promotion. Of course, ability is the prerequisite.

Where does the CNC lathe work the most in Zhejiang? I'm sure it's near Hangzhou and Ningbo, but the salary of this position is generally low, with little difference, ranging from 3,000 to 2,000.

Is it better to go to Zhejiang or Shenzhen for CNC lathe work? Now Jiangsu and Zhejiang are better than Shenzhen.

You can go to Kunshan, Xiaoshan, Ningbo and Yuyao.

How to adjust jitter when CNC lathe tool rest works

Usually, the middle drag plate shakes.

-The ball screw nut mounting screw is loose.

-The plug iron of the middle carriage is loose.

Excuse me, does Shenzhen Baoan Xixiang CNC lathe work? Guanlan Dafu is here.

Is CNC lathe work harmful to health? Potential health hazards of CNC lathe work;

1, noise pollution, workshop noise is very high;

2, iron pollution, processing parts will produce some debris;

3. The working fluid is polluted. When turning parts, alkaline working fluid will be added, which will be polluted after long-term contact.

The above-mentioned potential pollution is generally done according to the workflow, and the protection is well done with little impact.

CNC lathes and turning centers are high-precision and high-efficiency automatic machine tools. The machine tool is equipped with multi-station turret or power turret, which has a wide range of machining performance, and can process linear cylinders, oblique cylinders, arcs, threads, grooves, worms and other complex workpieces. It has a variety of compensation functions of linear interpolation and circular interpolation, and has played a good economic effect in the mass production of complex parts.