How to maintain the gas stove

If you want to repair the gas stove, you need the following steps:

1. Cut off gas and power: Before maintenance, cut off the gas source and power supply of the gas cooker and pull out the power plug from the power socket.

2. Cleaning the cooker: clean all parts of the cooker and gas stove with clean water and a small amount of neutral detergent, and clean the oil and dust on the surface of the kitchen utensils as much as possible.

3. Check whether the circuit is normal: check whether the circuit connection of the gas stove is loose, whether there are problems such as aging damage, and ensure that the circuit is normal.

4. Check the valve: Check whether the valve of the gas stove is blocked or damaged, and it is necessary to clean the valve or replace it with a new one.

5. Replace parts: If the parts of the gas stove are aging and seriously damaged, they need to be replaced in time, such as burners and igniters.

6. Installation and adjustment: After replacing the gas stove components, it is necessary to install and adjust the gas stove to ensure that the flame size, gas quantity and ignition point are normal.

Finally, pay attention to keep the environment well ventilated during the use of gas stoves. If there are problems such as air leakage during use, stop using it in time and investigate the cause of the failure.