Five steps of marble renovation process

There are generally five steps in the marble renovation process: the first step: repairing the damage and sewing glue; Step two: grinding the cutting position; Step 3: grind the stone from coarse to fine with a special stone mill; The fourth step: protection; Step 5: Crystallization treatment. Wuhan Feng Qi specializes in stone nursing, which is well-known in the industry and has a detailed introduction. Generally, it is charged by area.

Repair damage and intermediate joint glue

First of all, the original damaged surface and middle seam of stone installation are cut neatly again, so that the width of the seam becomes almost the same. Then use marble glue close to the color of stone to repair it.

Cutting position grinding

Carefully polish the cutting position with a special cutting grinding blade to make it a flat whole with the stone.

stone crusher

Use special parts to grind the stone from coarse to fine, so that the ground is smooth and flat.

protect

The use of special stone curing agent can fully penetrate into the stone and form a water-blocking protective layer, so as to achieve waterproof, antifouling and weatherproof of stone.

Crystallization treatment

Under the heavy pressure of grinding, stone and crystalline powder will react physically and chemically at high temperature to form a dense and hard protective layer, which will be polished to lay a good foundation for future maintenance.