Should I choose Roland or Heidelberg?

If you choose between Germany and Germany, it must be Heidelberg, especially the processing factory. It's strange that Roland doesn't kill you, because Roland's waterway design is very strange, which is to put the version first and then inject water. For short version processing, this project wastes about 65,438+050 sheets of paper. In addition, the air volume cannot be preset, and the manual adjustment of the flying head and the design of short ink path are not suitable for short version processing. Besides,! Look at Roland's slogan again: We are "slow"!

When it comes to thick paper, XL75 (CD74)F format is suitable for color boxes and pages. Needless to say, the stability of the equipment, the middle paper gun adopts a word design, the spacing is wider than Roland 500, and the curvature of thick paper is the smallest. Air cushion paper guide is standard, unlike Roland's air cushion blower, which can't automatically compensate with the machine speed.

By the way, Heidelberg has adopted quite a few automatic compensation functions on the whole machine, such as powder spraying, front and rear air volume, skew correction and so on. These are all things Roland doesn't have. Try buying a Roland if you don't believe me. After-sales service, again, Roland is "slow"!

If your processing business is not higher than 350g, it is recommended to choose SM74-4-H assembled in Shanghai, with automatic ink washing roller and automatic ink stripping as standard. I didn't keep flying, but I kept receiving paper. If you print more than 0.3mm paper, you only need to adjust the gap between hot stamping and paper transfer (this is a trick. )

XL75-4-F: The maximum paper size is 750x605mm, and the maximum printing area is 740x585mm. Perfect!

SM74-4-H: the maximum paper size is 740x530mm；; Maximum printing area: 740x5 10mm, practical!

Do you need any other reasons to choose Heidelberg?

Right, right, where are you?