Responsibilities of Safety Production Department of the Company

Job Responsibilities of Safety Production Department of the Company (selected 15)

In the rapidly developing society, more and more places are exposed to job responsibilities, which mainly emphasize the responsibilities within the scope of work. There are many points for attention in formulating job responsibilities. Are you sure you can write it? The following is the job responsibilities of the company's safety production department that I collected for you. Welcome to read, I hope you will like it.

Responsibilities of Safety Production Department of the Company. Under the leadership of the person in charge of the enterprise, be responsible for presiding over the daily work of safety production of the enterprise. Specifically implement the responsibilities of the person in charge of the enterprise.

2. Seriously publicize and implement the laws, regulations and normative documents promulgated by the state, XXX, XXX, the competent department of construction industry and the administrative department of labor safety supervision.

3, responsible for enterprise safety work plan, objectives and annual summary.

4, responsible for enterprise safety work conference.

5. Exercise the right of rewards and punishments within the scope stipulated by the enterprise system.

6. Assist leaders in organizing safety activities and inspections, stipulate or modify the safety production management system, be responsible for compiling internal safety operation procedures of enterprises, and supervise and inspect the implementation.

7, safety education for the broad masses of workers, responsible for the entrusted training of special operations personnel.

8, regular production safety inspection, supervision and inspection of the project intends to subordinate company safety management.

9. Participate in the joint review of construction organization design and construction scheme, attend production meetings, master information, and prevent and predict the possibility of accidents.

10, participate in the design and safety acceptance of temporary electrical engineering, put forward specific opinions and supervise the implementation. Refer to the self-made hiking equipment, check and accept all kinds of facilities and equipment before putting into use after maintenance, and approve the use after passing the inspection.

1 1. Participate in the installation and acceptance of general and large and medium-sized special scaffolding, and urge relevant departments or personnel to solve the problems after finding them.

12, go deep into the grass roots to study unsafe trends, put forward rectification opinions, stop illegal behaviors, and have the right to stop operations.

13. Assist the leaders, supervise the normal operation of the safety guarantee system, and report to the leaders in time for the units with problems. Urge to solve it.

14. Identify new labor protection articles and supervise their use.

15. Any unit or individual who enters the site has the right to supervise whether it meets the safety management regulations of the site and superiors, and has the responsibility to correct the problems immediately when found.

16, urge the team leader to receive and distribute labor protection articles in time according to regulations, and know that workers use them correctly.

Responsibilities of Safety Production Department of the Company 2 1. Take direct leadership responsibility for the company's safety production, assist the legal representative to seriously implement the guidelines, policies and regulations on safety production, and implement the company's various safety production management systems;

2, organize the implementation of enterprise long-term, annual, special period safety work planning, objectives and implementation plan, organize the implementation of the responsibility system for production safety;

3. Participate in the preparation and review of construction organization design, special complex engineering projects or professional engineering projects. To examine and approve the safety technical management measures in the engineering production and construction projects of this enterprise, and formulate the use plan of the funds for safety technical measures in construction production;

4, leading the organization of the enterprise's production safety publicity and education work, determine the safety assessment indicators. Lead and organize the training, evaluation and examination of outsourcing team leaders,

5. Lead and organize the regular and irregular safety production inspection of this enterprise, and solve the unsafe production problems in construction in time;

6. Listen carefully and adopt the rationalization proposal of safety production to ensure the normal operation of the safety production guarantee system of this enterprise.

7. Under the guidance of the accident investigation team, organize the investigation, analysis and handling of particularly heavy casualties.

Job responsibilities of the safety production department of the company Article 3 Article 1 Seriously implement the guidelines, policies, laws and regulations of the party and the state on safety production and the instructions and regulations of superiors, and be responsible for the company's market research, marketing plan, marketing policy formulation, customer service, market access handling, bidding management, invoice management, product price formulation and other work under the leadership of the competent deputy manager to achieve safety objectives.

Article 2 formulate sales policies, fully mobilize the enthusiasm of sales staff and strive to expand sales.

Article 3 Investigate the market situation and establish regional management sales.

Article 4 Be responsible for the management of the company's sales staff and put forward suggestions on rewards and punishments.

Article 5 Coordinate the internal and external sales relations of the company and create a relaxed atmosphere for the company to expand sales.

Article 6 handle the internal market access of the company's products.

Article 7 Be responsible for the implementation and rectification of safety production and quality standardization within the business scope.

Article 8 Plan the company's advertisements, organize relevant departments of the company, participate in relevant exhibitions, and expand the company's popularity.

Ninth responsible for the situation issued, reported, the superior notice, notice, leadership instructions timely inspection and implementation.

Article 10 Strictly control the issuance of invoices for products to ensure that the company's invoice review meets the requirements.

Eleventh major accidents, immediately report to the company leaders, timely dispatch and organize emergency rescue, and report to the superior according to regulations.

Responsibilities of Safety Production Department of the Company 4 1. The Safety and Quality Department is the supervision department of the company's safety production and engineering quality, and works under the business guidance of the company's leaders and superior safety supervision departments. Mainly in accordance with the Mine Safety Law, Coal Mine Safety Regulations, Coal Mine Safety Supervision Regulations, national policies and regulations on safety production and quality management and the company's quality and safety management system, exercise supervision and inspection rights and be responsible for the daily safety and related business of the unit.

2, timely and accurately convey and implement the superior safety and quality documents, instructions and other instructions, and supervise the implementation.

3. Supervise and inspect and cooperate with relevant departments to carry out "three-level education" and job-transfer safety education for new workers. Cooperate with other functional departments to do a good job in mine-wide safety technology training and education, and organize and check the certificates of all units.

4. Conduct on-site supervision and inspection on the production and construction process according to the safety production regulations and post standards. Supervise and inspect the implementation of national safety and quality guidelines, policies and regulations, safety and quality regulations, rules, systems and measures issued at all levels in production and construction projects, and the development of safety and quality activities.

5. Go deep into the construction site, grasp the safety and quality trends, find hidden dangers of accidents in time, and put forward rectification opinions. Stop illegal operations and illegal command. Punish the "three violations", issue a notice of rectification of hidden dangers, and conduct a review. Under special circumstances, have the right to stop production and direct workers to evacuate from dangerous areas. Protect the scene of the accident, participate in accident tracing, and implement the accident responsibility.

6. Participate in the price inspection and completion acceptance of construction projects. Supervise and participate in the distribution of safety rewards and the extraction and use of safety technology fees.

7. According to the superior laws and regulations and the spirit of company documents, carry out safety supervision, inspection and punishment on outsourced construction units and operators, and investigate and deal with safety accidents.

8. Participate in the company's safety production and engineering quality meetings, examine and approve procedures and measures, and be responsible for the investigation and analysis of safety accidents and quality accidents. Responsible for the control and inspection of nonconforming products, organize the review and disposal of quality and safety accidents, and supervise the implementation of corrective and preventive measures.

9. For the person responsible for the accident, the parties involved in the "three violations" have one vote of veto in the selection, promotion and reuse.

10, organize the total quality management of engineering construction projects, promote the construction of safety standardization site, supervise and inspect safety quality, and ensure the implementation of various guarantee measures such as civilized construction. Safety accidents and major hidden dangers in the process of production and construction shall be reported to the superior in time as required.

1 1. Safety and quality department personnel should constantly improve their professional level and management ability to meet the needs of mine production, construction and development, and keep their personnel relatively stable.

5 1, the responsibilities of the company's safety production department strengthen the ideological and political work of safety, strengthen the safety awareness of outburst prevention, organize employees' safety outburst prevention training, and improve employees' outburst prevention work ability.

2, completes the staff professional knowledge training, completes the geological prediction, annual and monthly plans, and supervision, inspection and implementation.

3, strengthen the management of geological data in each mining area, do a good job in geological prediction, and improve the ability of mine geological outburst prevention.

4. Organize department personnel to go deep into the site to solve problems such as survey, geology and hydrology encountered in production in time.

5, organize department personnel to participate in technological innovation and new technology promotion activities, and actively carry out outburst prevention research.

6, to assist the company chief engineer to do a good job of mine safety outburst prevention.

7. Assist the vice president of production to implement the comprehensive outburst prevention measures, plans and projects within the business scope of the production department.

8, to participate in the prevention and control of outstanding measures came to work, the implementation of the measures of research, implementation and assessment.

9. Participate in the inspection on the implementation of outstanding prevention and control measures organized by the company, and be responsible for the rectification of problems found within the business scope.

10, cooperate with outburst prevention department to do a good job in outburst prevention knowledge training for employees in this system and improve their awareness of outburst prevention.

Job Responsibilities of Safety Production Department of the Company Article 6 Job Responsibilities

Article 1. We must actively assist the production minister to carry out the work, implement the relevant management measures of project quality assessment, and do a good job in the project quality management of this enterprise.

Article 2 the organization and coordination of technical management personnel to carry out the engineering quality inspection and acceptance of coal mining face.

Article 3 According to the actual situation, evaluate the engineering quality level fairly and reasonably, and report to the production minister and relevant leaders in time.

Fourth engineering quality acceptance records and grade evaluation must be recorded and archived for inspection by relevant leaders.

Article 5. While doing a good job in engineering quality evaluation, accurately summarize the monthly, quarterly and annual workload of each unit and report it to the relevant leaders to attend the acceptance meeting at the end of the month.

Article 6 Do a good job with due diligence and put forward suggestions for improvement to the Minister in time.

responsible

Seventh due to dereliction of duty caused economic losses to enterprises, quality inspectors should be directly responsible.

Eighth report materials are not submitted in time, not filed, the quality inspector directly responsible.

Article 9 If the summary data and evaluation grade are inaccurate, the quality inspector shall be directly responsible.

Article 10 If the project quality is poor due to dereliction of duty, the quality inspector shall bear the main responsibility.

Article 1 1. Those who are directly or mainly responsible for the above shall be informed, punished and investigated for criminal responsibility in accordance with relevant laws and regulations according to the seriousness of the case.

Responsibilities of Safety Production Department of the Company 7 1. In the work, always adhere to the idea of "safety first", strictly implement the "Safety Law" and related laws, regulations and rules, and always put safety in production at the top of the work to do a good job.

2. Participate in safety activities, learn safety technical knowledge, and strictly abide by various safety production rules and regulations.

3, consciously carry out safety education, and constantly improve safety awareness, in order to meet the needs of safe production.

4. Earnestly carry out cost accounting and economic analysis, correctly calculate and settle accounts, and calculate the loss and scrap of various components (accessories), the cost of engineering rework, repair and reinforcement, etc. , to ensure the smooth progress of production safety and construction.

5. Strengthen enterprise capital turnover and control unplanned expenses. Take care of the funds.

6. Establish the unit project economic accounting system, timely settle the project price, check the design change visa, and adhere to the management measures for completion settlement.

7, the unqualified project construction, have the right to refuse all unreasonable expenses. The economic losses caused by rework and repair should be strictly controlled and the responsibility should be investigated.

8, study and implement the policy of high quality and good price, unit engineering measurement cost analysis.

Responsibilities of Safety Production Department of the Company 8 1. Guided by the company's strategic objectives, integrate the overall resources of the supply chain and establish and improve an orderly and efficient supply chain management system.

2. Maintain the supplier relationship in time and evaluate the suppliers of various accessories/garments every month.

3, reasonable arrangement of processing plants, effective coordination of outbound plan, grasp the production schedule, quality management, timely solve the problems in the production process, and establish a prevention and control mechanism.

4. Strictly control the delivery date and product quality of each item.

5. Review the process sheet and quality control inspection report.

6. Budget the cost of each commodity in advance, and be responsible for price comparison, accounting and control during ordering.

7. Arrange and review the reconciliation of the processing plant, and coordinate the arrangement and follow-up of the payment plan.

8. According to the strategic objectives, formulate the annual employment plan and cooperate with the human resources administrative team to complete the talent recruitment work in time;

Responsibilities of Safety Production Department of the Company 9 1. Inform, supervise and guide the workshop staffing according to the production plan, ensure that the production plan is completed on time, and receive raw and auxiliary materials from the warehouse according to the production plan;

2. Effectively control the consumption of raw and auxiliary materials in the production process and workshop every day, and make records;

3. Break down the production plan and break down the daily plan into related processes or sections; Strictly implement 5S site management to make workshop production clear and orderly;

4. Supervise the team members to fill in production data and various statistical forms accurately;

5, timely grasp the equipment operation, found that the problem handled in time;

6. Strengthen the training of employees' operation skills, and do not operate illegally;

7, strengthen the control of production cost, put an end to waste;

Responsibilities of Safety Production Department of the Company 10 1. Strictly implement the superior scheduling orders.

Second, according to the instructions of superiors, arrange team members to complete various work and production tasks.

Third, organize team members to participate in safety activities and make records.

Four, actively participate in various technical learning and training, improve the level of business technology.

Five, abide by the safety regulations, transportation regulations, operation management system, the implementation of anti-accident measures, labor safety and health measures, to prevent misoperation.

Six, strictly implement the "two votes, three regulations, four systems", adhere to the "four pass" principle.

Seven, according to the working ticket of safety technical measures, to ensure the safety of maintenance and operation.

Eight, adhere to the inspection tour, found defects timely report, make records.

Nine, when the accident happened, responsible for leading the class to deal with the accident, and timely report the accident to the superior.

Ten, improve all kinds of records, responsible for reporting the operation to the relevant departments.

Eleven, strengthen team management, do a good job in team building.

12. Be responsible for the work, effect and safety production of this class.

Responsibilities of Safety Production Department of the Company 1 1 1. Proficient in various charging standards and the scope and standards of various fees, and strictly control them.

Two, carefully review the original documents of all kinds of reimbursement or expenditure; In violation of the provisions of the financial system, should refuse to handle; Incomplete contents, incomplete procedures, wrong figures, discrepancy between attached tickets and reimbursement amount, irregular writing, etc. , and should be returned for completion, correction or rewriting.

Three, according to the legal original documents, login cash account, accounting, the figures should be accurate, the abstract should be clear, the handwriting should be neat, and make daily registration.

Four, strictly abide by the cash management system, cash on hand does not exceed the prescribed amount, do not spend money indiscriminately, and may not misappropriate cash without permission. Without the approval of the leaders, white bars and white bars shall not offset the cash on hand.

Five, the implementation of bank settlement system and monetary management system. Strengthen the management of bank checks, be responsible for issuing checks, and ensure that the procedures are complete and the amount is accurate and timely.

Six, conscientiously and accurately do a good job in the collection, storage and settlement of kindergarten fees. At the same time, timely and accurately do a good job in the distribution of policy benefits and allowances enjoyed by faculty and staff.

Seven, strictly implement the financial security system, manage cash, various seals, blank checks, blank receipts and other securities, tickets and account books.

Responsibilities of Safety Production Department of the Company 12 1. Conscientiously implement various safety production rules and regulations, implement technical measures for safety production formulated by superiors, strengthen construction site management, and do a good job in civilized construction production. Take direct management responsibility for safety production within the jurisdiction.

2. Inspect the equipment in strict accordance with the inspection route. When finding or learning that the equipment is abnormal, we should try to eliminate it on the premise that safety measures are in place to ensure safety, otherwise we shall not operate.

3. When repairing at night, strictly implement the "three simultaneities", disclose the hazard sources and safety precautions of the repair project to the operators on site, and participate in maintenance tracking and confirmation. Key and high-risk projects shall be notified to the safety officer for on-site supervision.

4, regularly or irregularly organize homework personnel to learn safety technology operating rules and safety rules and regulations of each type of work, adhere to the safety disclosure while handing in the task, and check and supervise the operation of the safety team.

5. In case of casualty accident, on the premise of ensuring their own safety, immediately organize rescue, quickly report to the superior leader or the safety management department of the company, protect the site and participate in the investigation and handling.

6, correctly handle the relationship between production and safety, not illegal command, organize construction personnel and teams to carry out safety activities, and seriously eliminate hidden dangers of accidents. For teams that repeatedly violate regulations, they can be forced to stop production for rectification when necessary.

7. Safety protection facilities erected on the production construction site must be checked and accepted before use, and can only be used if they are qualified.

Responsibilities of Safety Production Department of the Company 13 1. According to the production plan, make production instructions to ensure the completion of the production plan;

2. Coordinate daily production activities, check daily production progress, solve problems raised in production, form meeting minutes, and check and implement meeting decisions;

3. Organize production statistics, daily production reports, monthly reports, quarterly reports and annual reports;

4, organize the formulation and revision of production management regulations, process regulations, standard operating procedures and other documents;

5. Organize the supervision and management of the production site to ensure the effective implementation of various rules and regulations and operating procedures, and ensure that all links in the production process meet the requirements of GMP and relevant laws and regulations;

6. Organize and inspect the implementation of production process discipline to ensure that the deviation in the production process is handled timely and properly;

7, presided over the production department technical analysis meeting, in view of the technical problems in production, organize to participate in technical research, do a good job of technical analysis;

8. Organize the formulation of job responsibilities of personnel in this department, ensure that production-related personnel receive necessary pre-job training and continuing training, and adjust the training content according to actual needs;

9. Conduct post performance appraisal for the personnel of this department, cooperate with the personnel department to plan and evaluate the professional and technical functions of key personnel, and optimize the personnel structure;

10. Organize and assist the company in product line planning, new product development and related verification;

1 1. Implement safety production management regulations to prevent production accidents.

Job responsibilities of safety production department of the company 14 1, responsible for workshop production technology, engineering technology, production plan management, process quality control and cost control;

2, responsible for personnel management and daily affairs of the department.

3. According to the development needs of the company and the actual production situation, improve the organizational structure and staffing of the workshop.

4. Analyze the problems that affect the efficiency and quality of products, put forward improvement plans and solve problems, and reduce labor costs;

5. Improve the situation of low production efficiency, high defective rate and high loss of raw materials, and put forward improvement decisions and preventive measures;

6, responsible for organizing the implementation of the company's safety production management system, combined with the actual operation characteristics of the workshop, do a good job in the safety protection measures for personnel in each position.

7. On-site 6S management to ensure the workshop is clean and orderly.

Responsibilities of Safety Production Department of the Company 15 1. Carry out all kinds of work under the leadership of the workshop director, directly direct the safety production of the team, organize and participate in the completion of tasks of various types of work, strictly implement one-day standardized operation, and pay close attention to the implementation of various rules and regulations.

2. According to the monthly task plan and dispatching list issued, reasonably organize manpower, and implement the task to people, ensuring quality and quantity? It's done.

3. Fully grasp the working attitude, work discipline and technical ability of team members, and make inspection records carefully. Implement the responsibility system and improve the production technology level of employees.

4, management team all machinery, machinery and materials, and strengthen the maintenance, and constantly improve the operation process, to ensure the normal production, do mechanical equipment storage to people.

5. Supervise and inspect the implementation of the "two disciplines" of the team. Those who violate the rules or the product quality is unqualified should be criticized or reworked. Seriously, depending on the seriousness of the case, report it step by step and give corresponding disciplinary action.

6. Be responsible for registering employees' sporadic leave at work, reporting to the workshop at the end of each month, and having the right to approve employees' sporadic leave at work within four hours.

7, carefully organize the cleaning on weekends, often do a good job in the health work inside and outside the workshop, to achieve civilized production.

8, complete the tasks assigned by the leadership.

;