Installation method and matters needing attention of bedroom door suit door

What is the bedroom door now? It is very popular with everyone, but everyone is easily damaged during installation, so everyone should understand the installation instructions and precautions before installation. Let's take a look at the detailed installation of the installation door and the precautions for installing the door.

1. Installation method of bedroom door kit door 1, site cleaning, door opening installation site and door site cleaning, the size entrance and exit can be installed. Contact: After the door leaf size measurement is planned, it is not easy to damage the dirty wall construction and soil.

2. The bedroom door is a combination of door and door frame. The roof with 6-8 mm opening gap is 20-50 mm longer than the actual size of the suite door, and the detailed installation method of the door nail fixing nail. Next, nail the left and right frame edges of the pull ring, the door opening and the inside of the door.

3, door frame installation, vertical door frame on both sides of the opening, in order to obtain the upper clearance of 10 mm, and the four fixed points on both sides of the door frame between the intermediate frames should be evenly exported, and sawdust should be used as the bottom door hinge plate for fixing the door frame.

4, please install the door leaf, how to replace a detailed installation suite door, hinges should pay special attention to the door leaf installed in the fixed frame leaf, the flatness of the door frame and the door, just switch it when closing the door, regardless of whether the right door top is empty.

5. Installation line, the size of the door frame cutting line only needs to be glued on the intersection line of intersection line 502, then the short lines are connected into a straight line, then the door frame is perforated and the nail strip is capped.

6. Install the bedroom door, lock it, install the outer handle cover, cover the door lock hole, take two screw positions, drill a 10 mm twist drill and two holes. Install the lock cylinder to the door leaf from the side, and install the lock screw of the lock cylinder. Determine the installation position of the lock cover, cut the lock cover by hand and fix it with screws.

7. Install the door suction. How to install a detailed suite door? The door above the floor of the door can be easily installed on the door frame and then fixed after installation.

Second, the bedroom door cover door 1 installation precautions. For the bedroom door, in addition to fixing the wall, it is necessary to nail the cover plate with wooden bricks or steel bars on the outside of the cover plate. The wooden brick must be trapezoidal, and the brick must be firmly fixed on the wall. When the door cover is 2m and above, each side should be buried on three sides; Less than 2m, two buried on each side.

2. If the doors and windows of this group are in contact with the brick surface, the contact between the door and window cover and the brick wall should be treated with anticorrosive oil to prevent corrosion due to damp.

3. Installers must protect their property and other products on site. If the installer is damaged by other products during installation, he can apply for a refund.

The above article is about the detailed installation method of bedroom door cover and the relevant knowledge of matters needing attention in bedroom door cover, hoping to help everyone.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~