How to remove the feed bearing of Shenyang Zhongjie radial drilling machine

Remove from the bottom of the seat. The disassembly steps of the feed bearing of Shenyang ZOJE radial drilling machine are as follows.

1. Turn off the power and remove all motors and related electrical components.

2. Remove the headstock from the right side of the drilling machine.

3. After fixing the rocker arm, dismantle the lifting mechanism and lift the rocker arm and outer column.

4. The inner column is removed by the base.

Bearing is actually an important part of mechanical equipment, and its main function is to support the rotating body of machinery and reduce the wear during the movement.