Looking for a car film master around Hangzhou, it is a color-changing film for the whole car. I want to film the whole car, and take a private job. Oh, the toll can be posted.

the film should not only choose regular products, but also pay attention to the construction process of car film. Because the effect of film pasting depends largely on the construction process.

1. In order to prevent dust and impurities from affecting the film pasting effect, the car body glass should be cleaned before the film pasting.

2. The parts that may be damaged during car film pasting should be covered in advance to prevent scratching the paint, interior and other parts; Parts that may affect the construction also need to be dismantled in advance.

3. After the overall treatment of the car body, the car film should be cut, and the car film should be cut initially according to the size of the glass.

4. Paste the roughly cut car film on the car glass, and then bake the film according to the width of the car glass for the front and rear gears, so as to make the width of the car film close to the glass, so that the pasted car film will be flat and free of water marks.

5. After baking, the film will stick to the glass, so it needs to be further modified, that is, the corresponding shape will be finely cut according to the shape of the glass.

6. window film is stuck on the inside, so the key step is to put on the film. The requirement of the upper mold is to clean the inside of the glass quickly and accurately, and push out the water as soon as possible.

7. After all the work is finished, one final inspection is needed. After the whole vehicle is pasted, the condition of each window should be checked, especially at the corners. If bubbles are found, they should be treated immediately.

Reminder:

After pasting the film, it is required that the window cannot be opened for 2-5 days, the defogging function cannot be used in the rear stall, and the air conditioner cannot be used to blow the front windshield; Do not use articles with teeth to scratch the glass; After the completion of the construction, you must fill in the application for quality assurance, so that the after-sales service can be guaranteed; After 3 days, you'd better go back to the store and check it again. If there are any quality problems, you should repair them in time.