How to measure the size of wooden doors? See the specific method here!

When decorating indoor spaces such as bedrooms, kitchens, and bathrooms, many families will choose to install wooden doors, which are both economical and environmentally friendly. Before installing the wooden door, be sure to measure the size of the wooden door so that you can avoid various troubles during installation. Below I will explain to you the methods and precautions for measuring wooden doors. I hope it will be helpful to you.

1. Method of measuring wooden doors

Door width = door leaf width and door frame width

Door opening width = door leaf width and door leaf width Leave a gap Door frame Main board thickness Door frame solid board thickness Door frame adjustment allowance Measurement of the door opening

Door opening width: Measure the distance to the left and right of the door opening horizontally, select more than five measurement points for measurement, among which the minimum value (minus The door frame adjustment allowance) is the door frame extension width dimension. The height of the door opening: vertically measure the distance up and down the door opening, and select more than three measuring points for measurement. The minimum value (see door frame adjustment allowance) is the door frame extension height dimension. Note: During measurement During the process, attention should be paid to the ground treatment conditions, and the thickness of the ground decoration materials should be reserved for needs.

2. Conditions that must be met before measuring wooden doors

1. The customer and the construction leader must be on site

2. Water and electricity renovation and wall renovation must be completed .

3. The horizontal line is there, the kitchen and bathroom walls and floor tiles need to be paved, and the floored rooms need to be leveled. The height of walls, floor tiles and floors should be determined.

3. Details of wooden door measurement

1. Measure the height three times, in the order of left, middle and right, to get the most accurate result.

2. Pay attention to the order of door and floor installation. It is recommended to install the door first and then the floor.

After the ground treatment is completed, other projects can be constructed. When the construction period is nearing the end, it is time to install the floor and wooden doors. Which one is more reasonable to install first, the wooden doors or the floor? Let’s analyze it. If you install the floor first, there are some problems that cannot be solved.

(1) The position of the buckle at the transition between the living room and the bedroom cannot be determined. The craftsmanship requires that the buckle must be directly under the wooden door. The buckle cannot be seen inside or outside after the door is closed.

(2) After the floor is installed, make the skirting. If the door cover is not installed, the skirting on both sides cannot be fixed, so the workers who install the floor will have to come to fix it, which is a waste. Time for both sides. Install the door first. The door frame can go directly to the ground. When installing the floor, you can use an electric saw to cut out a reasonable space under the door frame to lay the floor. The gap under the wooden door can be reserved according to the thickness of the floor, usually 2cm-2.5cm.

4. Precautions during the wooden door measurement process

Finished wooden doors require door opening dimensions to be as accurate as possible. In order to reduce consumer ordering costs, regular brands will calculate the opening width, height, and wall thickness. It is similar to the standard combination size, so cooperation at the construction site is required. Pay attention to the following points:

1. The door opening is required to have a vertical wall without tilt, the left and right wall stacks have the same thickness, and are on a vertical end face. Otherwise, the door may be installed incorrectly or there may be gaps and uneven sizes between the wiring and the wall.

2. The surveyors will put forward corresponding rectification requirements based on the actual hole size measured on site, and ask the customer to confirm the size of the hole for product production and installation, and then the customer will implement the construction team to carry out the rectification construction.

Different series of doors have different structural dimensions, and it is necessary to pay attention to the demarcation positions of different materials during ground construction (floor and floor, floor and masonry layering positions). Avoid the phenomenon where two different materials are exposed on the ground where the door leaf falls.

3. If the thickness, width or height of the rough wall does not match the standard combined size when measured, the customer's construction team needs to do the construction by themselves before the finished door is installed. This can be done with plates, bricks and stones. Modifications, such as adding/cutting out wall stacks, heightening/lowering door openings, etc. Prevent the finished door from being installed smoothly.