Sika epoxy floor paint design requirements and environmental requirements

Sika floor paint has the characteristics of strong acid and alkali resistance, wear resistance, pressure resistance, impact resistance, mildew resistance, waterproof, dustproof, anti-slip and anti-static, electromagnetic wave and other properties. It has bright and diverse colors and is clean. easy. It is widely used in surface coating of electronic factories, hospitals, aviation and aerospace bases, laboratories, offices, supermarkets, parking lots, etc. Next, follow us to learn about the relevant content!

1. Design requirements

1. Sika epoxy floor paint adopts a one-time coating process, regardless of whether there is No matter how large the area, there are no connecting seams, and it is a dust-free material with strong adhesion, friction resistance, and strong hardness. It has been accepted and used by many domestic manufacturers and users.

2. Epoxy resin floor design solutions: Various solutions can be designed according to different use requirements, such as thin-layer coating, 1-5mm thick self-leveling coating, anti-slip and wear-resistant coating , pressure-resistant mortar coating, water-based breathable coating, anti-mildew and antibacterial, anti-static, anti-corrosion coating, etc.

3. Basis for the design of epoxy resin floors: In order to quickly and accurately select suitable epoxy floor materials, the floor design scheme can improve performance, performance, safety, economic performance, etc. To achieve the best, we recommend that customers consider the following factors: performance requirements, floor conditions, base layer conditions, aesthetics, safety requirements, and other related requirements, etc.

II. Environmental requirements

1. Environmental requirements during epoxy resin floor construction: A. Base surface moisture content: non-water-based epoxy flooring cannot be constructed when it is above 6 ; B. Humidity in the air: Construction should be stopped when it is above 85; C. Construction temperature: Special formula should be used if it is below 5°C.

2. Epoxy resin floor maintenance: Epoxy resin floor is a high-value, high-quality, high-demand product that requires careful care and maintenance. The correct use method can keep the floor as good as New, and can extend the service life, the measures are as follows: everyone entering the workshop needs to change shoes (to avoid bringing outside mud and sand into the workshop and scratching the ground); for all hardware, their feet must be wrapped in soft plastic or rubber to prevent them from being damaged during use. medium scratches the ground; when dragging the pallet, the pallet must be fully lifted off the ground, and when turning, pay special attention to the corners of the pallet to avoid scratching the ground; when cleaning the floor, use a soft mop or a wet and dry vacuum cleaner, which can be cleaned with water or Clean with an agent, but be careful that the floor is slippery; if it is worn or scratched due to long use, a small area can be partially repaired. If the area is larger, it is recommended to re-roll or trowel it. Please use hard or elastic rubber wheels for the wheels of carts and pallets, and use them separately inside and outside the factory.

The above is the editor’s detailed answer. I don’t know if everyone is satisfied with our introduction~.