How to renovate Dalian solid wood floor?

1. Before the renovation of the old floor, make sure the house is clean and tidy, and move out all the things in the house.

2. Grind off the original surface of the floor 1-2mm.

3. Then scrape putty, color, paint, wax and polish. We should pay special attention to painting. Generally, it is necessary to brush the primer once and the topcoat twice. When the floor surface is defective, we need to brush the primer several times.

Precautions for renovation of old floors:

1. It should be noted that not all floors can be decorated. Only solid wood floors, solid wood composite floors and bamboo floors with a surface thickness of more than 4 mm can be decorated. Because the initial grinding will wear off 1-2 mm, the floor that is too thin will easily wear out the middle layer, which will affect the life of the floor. Therefore, it is best to know the surface thickness of your floor from the seller before decoration.

2. If the color on the solid wood composite parquet is not saturated but colored on the surface, or the colored wood cortex is thin, it will destroy its parquet effect after polishing, so it is recommended not to renovate it.

3. If it is a reinforced floor, it can't be renovated, because there is an alumina wear-resistant layer on its surface. Renovation will destroy its wear-resistant layer and aggravate the aging of the floor.

4. If the floor has been damaged, moldy and deformed, it is generally difficult to renovate and remedy the serious situation.

In order to ensure the quality of floor decoration, it is best to ask a professional decoration company or cleaning company to take charge of this project. Conditional can invite professional supervision personnel to supervise the construction at the same time.