Job Recruitment Website - Job information - Cabinet installation recruitment
Cabinet installation recruitment
A, the installation of cupboard garderobe matters needing attention
1, wardrobe measurement. The wardrobe can be a wall or a sandwich, so as to ensure the effective use of space without deformation, but the upper and lower sides must be horizontal and vertical. If there is any error, the height difference between the left and right sides of the hole is required to be less than 5mm, and the bottom wheel of the closet door can make up for the error through the debugging system.
2. Install the track. When making cabinets, you need to reserve dimensions for the tracks. The reserved size of the upper and lower tracks of the folding door is 8cm, and the reserved size of the sliding door is 10cm.
3. Installation of gasket. Household cabinets are generally designed with drawers. In order not to affect the use, the position of the drawer should be paid attention to: when making three sliding doors, avoid the intersection of two doors; When making two sliding doors, they should be placed on one side of the door body; When making folding doors, there should be a gap of 17cm between the drawer and the side wall.
4. Installation of closet doors. The steps are as follows: first, fix the top rail, the front of the rail is on the same plane as the cabinet surface, and the upper and lower rails are laid flat in the reserved position; Then put the two doors into the track, measure the verticality of the doors with a level or ruler, adjust the position of the upper and lower tracks and fix them; Check whether the door body is parallel to both sides again, and adjust the door body by adjusting the bottom wheel to make the door frame flush with both sides; Finally, fix the anti-jump device and show the quality protection certificate.
Second, the cabinet installation time
1, the installation time of the cabinet is after the hydropower transformation, the kitchen tiles and wall painting are all done, and the cabinet needs to be measured twice before installation.
2. The first measurement was made before the hydropower transformation, with the purpose of designing the specific functions and layout of the cabinet. At this time, it is necessary to communicate with the designer the preliminary ideas of the kitchen, such as the placement of kitchen appliances and the type of range hood, so as to facilitate the reservation of power sockets. In addition, it is necessary to provide a hydropower map so that the construction party can arrange the route according to the hydropower.
3. The second measurement is made after the tile laying is completed, with the purpose of checking the specific size of the cabinet. At this time, you need to inform the cabinet company that you have determined the model size of the electrical appliances, range hoods, sinks, stoves and other products to be drilled, as well as the colors of trivial things such as cabinets, handles and baskets to be re-determined.
Third, how to buy a wardrobe
1, pay attention to the plate: the plate of the wardrobe determines the environmental performance of the wardrobe, because most of the clothes stored in the wardrobe are our personal clothes.
2. When buying a wardrobe, you should also pay attention to whether it conforms to the home improvement style: the home improvement style determines the type of wardrobe, and different home improvement styles also need to be different.
3. Pay attention to hardware when purchasing custom wardrobes: Many people ignore hardware when purchasing custom wardrobes, but the service life and satisfaction of custom wardrobes are often determined by hardware.
The above is the installation time and matters needing attention of cabinet installation recruitment, so you should buy it first, so that the decoration work can proceed smoothly.
- Related articles
- Project management process work summary report
- What are the advantages and differences between RT Mart and Yichu Lotus?
- What is the correct statement of 58 promotion code?
- How much is the salary of Jingyu Power Plant?
- What is an affiliated school?
- How to treat the little madness of Taobao anchor?
- Registration time of Wuxi institutions
- What is the telephone number of Huzhou Xing Wu Xinye Construction Investment Group Co., Ltd.
- What are the conditions for Qinhuangdao to settle down?
- Which travel agency is good for Guizhou tourism?