What does a riveter do?

Riveting is a manufacturing process of making steel structures from plates, profiles, wires and pipes by welding, riveting and bolting.

Riveting workers should not only make corresponding metal products according to requirements, but also have knowledge of drawing and drawing, common metal materials and heat treatment, and can correct raw materials and general structural parts with large deformation or composite deformation, and can make unfolded drawings with basic shapes. Can read and assemble the drawings of trusses, beams and columns, boxes, boxes and medium and low pressure vessels, and can carry out all-position positioning welding and riveting.

Riveting workers in China are one of the indispensable main forces in China's industrial construction. All industrial equipment shells, frames, supports, pipes, steel structures, containers, storage tanks, bridges, ships, vehicles, aviation, aerospace, etc. Are inseparable from the riveter. The riveting level of a country can measure the industrial level of this country.

Safety regulations:

1. Before working, tools and equipment must be checked and kept in good condition. The top of hammered tools, such as hammers and punches, should be free of burrs and scars, the hammer handle should be free of cracks, and the installation should be firm. Hammer must be added with iron wedge, and the top of all kinds of hammered tools shall not be quenched.

2, when using a sledgehammer, pay attention to the scope of the hammer. Think twice when you hammer. No one is allowed to stand opposite. Do not wear gloves when hammering.

3. Wear protective glasses when shoveling, splitting, riveting and welding, and don't operate on people. When using air shovel, you must abide by the safety technical regulations of air shovel.

4. Use riveter, fitter's equipment and fitter's common tools such as grinder, pneumatic tools, portable electric and portable pneumatic tools, sledgehammer, flat shovel, etc. Should be carried out in accordance with the safety technical regulations.

5. When using cranes to lift objects, you must abide by the safety technical regulations of bridge cranes. Check whether the spreader is safe and reliable. No one is allowed to walk or stay under the sling. Command correctly and cooperate carefully.

The above contents refer to Baidu Encyclopedia-Riveting Worker.