Various sewing methods for filling holes with needle and thread

Various sewing methods for sewing holes with needle and thread are as follows:

Draw a square, put the needle in from one corner of the square, put the needle out and go in from the other corner.

Thread repeatedly, and then thread one by one in turn until the pattern is completely covered.

Thread the thread through the sewn thread, then thread the thread of another color through the newly sewn thread, and tie the knot after wearing it.

Method 2:

Draw a Pentagon. Draw a Pentagon and put the needle through the middle of the Pentagon.

Thread the needle from the middle corner and the fifth corner in turn, and then thread the needle along the middle corner and the fifth corner in turn. After threading, thread the remaining threads through these threads.

Cover the whole body until it covers the whole body, and then tie a knot at the back.

Method 3

Draw a circle, put the needle in the middle of the circle, and then cross all the lines along the edge and center of the circle.

After covering the figure, cover the whole figure with the remaining lines of these lines, and put a needle on every two lines.

After covering it, tie a knot on the back of the hole.

Hand sewing thimble is an indispensable tool for hand sewing. Mastering the correct use of thimble can make hand sewing faster; Flat needle sewing is the most basic sewing method in hand sewing, which is used to sew thin double-layer fabrics together; According to the essentials of sewing the back needle, two tension needles are used for manual sewing with a large interval, which is used in the case of internal sewing together.