Various management systems of enterprises

Various rules and regulations of the mixing station

Job responsibilities of mixing station operators

1: Strictly abide by the rules and regulations of the mixing station, stick to your post, and do not leave your post without authorization.

2. Operate in strict accordance with process technical regulations and safety regulations.

3. Listen to the command of the on-duty internal adjustment, carefully input the relevant data into the computer program according to the requirements of the ingredient list, and start the production of concrete after confirmation by review. In semi-automatic production, the construction must be carried out according to the construction ingredient list issued by the laboratory.

4. In the production process, actively cooperate with the quality inspector to do a good job of concrete quality control. The operator is mainly responsible for the loss of unqualified concrete due to his failure to implement the mixture ratio and incorrect input data.

5. Carefully observe whether each component material of concrete exceeds the allowable deviation. If it is found that it exceeds the allowable deviation range, it must be reported to the on-duty internal adjustment in time.

6. Be responsible for the correctness of construction mix coding and the relevant performance of concrete when it leaves the factory.

7. Strengthen study, constantly sum up experience, improve the operation level, and control the operation well. Operators should pay attention to the discharge of concrete, and take immediate measures to deal with any abnormality.

8. Do a good job of microcomputer maintenance, so that the discharge form can be printed normally. If it can't be printed, it won't open.

9. When working in the operation room, you are not allowed to play games and other things unrelated to work on the computer, and you are not allowed to eat snacks and greasy food indoors.

10: In case of emergency in production (equipment is broken, machine is blocked, system department is abnormal, etc.). ), should be handled as soon as possible, as well as possible, and immediately report to the relevant leaders.

Equipment management and electromechanical maintenance

1: Machinists (electricians) must receive professional training, understand the structure and principle of the equipment, be familiar with the performance of the equipment, and achieve "three good" and "four good", that is, manage, maintain and use well, and can check, use, maintain and troubleshoot general faults.

2. Mechanic (electrician) personnel must hold relevant certificates, which will be issued by the Ministry of Construction. It is strictly forbidden for unlicensed personnel to carry out maintenance work.

3. Mechanic (electrician) personnel should carefully study the operating instructions of the equipment, strictly implement the maintenance procedures, observe and check frequently, eliminate the equipment faults in time, and make a record of fault maintenance. Major and unknown equipment failures should be reported in time, and it is strictly forbidden to rush and blindly dismantle and repair.

4. Strictly abide by the equipment maintenance system, and arrange special personnel for timely cleaning, lubrication and inspection.

Fastening and other routine maintenance work. Fill in the duty record in time, and carefully record the handover situation during the shift change. 5 Operating table should be kept clean. It is forbidden to do things unrelated to work on the operating table and to modify computer programs. Other software unrelated to concrete production should not be installed on the desktop. The input and adjustment of mixture ratio should be approved by the laboratory and carefully examined.

6. Make plans and reserves in advance, especially for gas and electrical components, such as relays, contactors, gas pipes, gas valves and cylinders. , so as not to affect the work.

7. Before the operator starts up and works, always observe the change of voltage. If the voltage is too high or too low, find out the reason, so as not to damage the operating system and electrical components due to voltage instability.

8. We should always check whether the sensors of the weighing system are in normal working condition to prevent misoperation caused by data errors.

9. Mechanical (electrical) workers should love their jobs and be dedicated. We should study business skills hard, observe discipline and obey orders.

10: The mechanic (electrician) has the right to prohibit irrelevant personnel from entering the operation room and mixing room of the concrete mixing station to prevent outsiders from entering and causing data loss and equipment damage.

Dispatching job responsibilities

1: Strictly abide by the rules and regulations of the mixing station, do not leave your post without leave, and stick to your post.

2. Assist the stationmaster to finish the production task on time, be familiar with the concrete production process, keep track of the vehicle dynamics in time, and ensure the uninterrupted supply of concrete.

3. When receiving the production notice, ask and ask for the name of the construction unit, delivery place, quantity, construction site, strength grade, impermeability grade, slump and other technical indicators, make detailed records, and notify the person in charge on duty and technical director in the form of production plan.

4. Before producing concrete, arrange the vehicles needed for production and inform the motorcade to get ready for departure.

5. Be responsible for the coordination between the construction site and the mixing station, track whether the performance of the concrete mixture that has been delivered from the factory meets the work requirements in time, and report to the laboratory and stationmaster in time.

6. Be responsible for handling all the production situations in the production process.

7. Other tasks assigned by the leaders.

Job responsibilities of the team captain

1: Fully manage the motorcade according to the requirements of this mixing station and various rules and regulations of the mixing station.

2. Responsible for organizing all drivers to complete the assigned transportation tasks. Have overall command and transfer management power over the operation, height, safety production, maintenance, financial accounting, personnel recruitment and training, rewards and punishments of the fleet.

3 responsible for organizing all drivers to do a good job in vehicle maintenance, maintenance and daily technical management. Ensure that the vehicle is in good technical condition for a long time.

4. Carry out traffic safety laws and regulations, do a good job in safety education, organize the safety production of motorcades, and ensure the safety of production and transportation and the completion of tasks.

5. Responsible for organizing basic moral education, ideological education and technical training for all drivers, and constantly improving the professional ethics, ideological level and technical level of all drivers.

6. Assist webmaster to recruit drivers. Drivers who violate the rules and regulations of the mixing station have the right to report, punish and expel. Coordinate the relationship between the team and the mixing station and its departments, and actively cooperate with several departments of the mixing station to complete the production tasks assigned by the mixing station.

7. Responsible for the implementation of vehicle operation scheduling, and fully improve the attendance of vehicles and personnel under the condition of ensuring safety.

8. Timely and properly handle traffic accidents. When a traffic accident happens, get to the scene in time to handle it properly, and make records to find out the reason. Even if the leaders of small motorcades and mixing stations report, special reports should be written for major accidents.

9. Keep safe driving records of vehicles and drivers.

10: Be responsible for the annual inspection of vehicles and drivers, keep abreast of the technical conditions of vehicles, and report to the team leader and the person in charge of vehicle dispatching and vehicle maintenance once the vehicles are found to be unsafe, so as to stop their operation and carry out maintenance in time. Responsible for handling all kinds of licenses for vehicle driving.

1 1: Strive to complete other tasks assigned by the leaders of this site.

Driver's job responsibilities

1: Seriously implement all laws and regulations on road traffic safety management and company rules and regulations, establish professional ethics and safety awareness of courtesy driving and safety first, and do not drive "hero car", "overlord car", "lucky car" and "tired car" to prevent all kinds of traffic accidents.

2. Obey the leadership, obey the deployment, go to work on time, and leave the car on time. Actively complete the assigned tasks according to quality.

3. Stick to your post and do your duty. No matter what happens, you should stick to your post in the process of vehicle transportation, and non-company personnel and unrelated unlicensed personnel are not allowed to drive the vehicle.

4. Do the daily maintenance of the vehicle, keep the vehicle in good technical condition, and keep the vehicle clean and tidy.

5. Do a good job in the registration and statistics of vehicle mileage, fuel consumption, safety, repair, maintenance and transportation tasks.

6. Fill in the equipment operation record carefully.

7. Consciously abide by the daily production and living order of the motorcade. Pay attention to maintaining the environment, dormitory hygiene and personal hygiene.

8. Establish the concept of collectivism and do a good job of internal and external unification. The idea of "first" should be established in the external construction site, and the image of the mixing station should be consciously maintained.

Job responsibilities of loader drivers

1; Abide by the company's rules and regulations, stick to your post, and do not leave your post without authorization.

2. Must be familiar with the relevant mechanical properties of loaders and hold relevant certificates.

3. The quantity must be timely and shall not affect the production.

4. Do the daily maintenance of the loader and assist the mechanic in maintenance. Always check the fuel consumption before use, ensure that the fuel tank is dry, and grease the bearings frequently. Since the beginning of this century, friction has been in a normal wear state.

5. Fill in the equipment operation record carefully.

6. When loading, shovel out the aggregates with little change in the upper water content, pile up the aggregates with higher tax rate at the lower level in free time, and then feed them evenly to ensure the uniformity of the water content of the aggregates. And make sure that sand and gravel do not mix.

7. Seriously complete other work specified by the Bureau.

Safety operation procedures for loaders

1: The loader should keep the brakes, horn and steering gear complete and sensitive when working, and obey the "traffic rules" when driving.

2. When the loader is fully loaded with the bucket, don't lift the bucket too high, generally about 0.5 meters from the ground.

3. When the loader cooperates with the dump truck, the dump truck should not pass under the bucket when loading.

4. The loader should avoid unnecessary high speed and sharp turns when driving.

5. When the loader encounters the phenomenon of increased resistance, tire (or crawler) slipping, engine speed dropping, etc., it should stop shoveling and do not operate forcibly.

6: When going downhill, it is forbidden for the loader to slip out of gear.

7: When the loader is working, no one is allowed to stand under the bucket arm or pass under the bucket arm.

8. When the loader is lubricated and adjusted after the boom rises, a safety pin must be installed or other measures must be taken to prevent the boom from falling and hurting people.

9. When working at night, there should be good lighting equipment around the loader and workplace.

10: After the loader is finished, it should be driven away from the work site, parked in a flat and safe area, and the handbrake should be tightened, and the bucket should be padded with square wood. Remove the sand and dust from the bucket and maintain the machine according to the daily maintenance items.

Fire safety management system

1: Strengthen the fire safety education in the mixing station. According to the requirements of the fire protection law, everyone has the obligation to maintain fire safety, protect fire control facilities, prevent fires and report fire accidents. Everyone knows the fire alarm telephone number 1 19, and everyone is familiar with the common sense of self-defense and self-help and the skills of safe escape.

2. Ensure that all kinds of fire-fighting facilities in the mixing station are in good condition, and check and maintain them regularly to ensure that the equipment integrity rate reaches 100%.

3. Flammable and explosive dangerous goods should be specially stored and kept by special personnel. There must be emergency supplies such as fire extinguishers in the city.

4: Smoking and naked flame are strictly prohibited in operation room, machine repair room and other places. After work, the staff should close the doors and windows in time to ensure safety.

5. Fire hydrants, fire-fighting equipment and other fire-fighting facilities should be taken care of by everyone. No one is allowed to move or damage them at will, and offenders will be dealt with severely.

6. Strengthen electricity safety inspection. Electricians must always check the wires and equipment in the hospital. If potential safety hazards are found, they should be rectified and maintained in time to ensure safety.

7: It is forbidden to use naked flame in the operation room and warehouse, to burn electric stove, fast heating stove, alcohol stove and mosquito-repellent incense, to smoke, to pull wires without permission, and to use any household equipment without permission.

8: When using gas welding and gas cutting, you should master the correct use method, pay attention to air leakage, explosion prevention and fire prevention, and close the gas valve after use to ensure safety.

9. Those who ignore the fire safety regulations and cause adverse consequences shall be punished by hell to pay until they are investigated for legal responsibility.

Safety production management system

In order to strengthen the labor protection in the production safety of the mixing station and ensure the safety and health of workers in the production process, this system is formulated in accordance with the relevant labor protection laws, regulations and other relevant provisions, combined with the actual situation of the mixing station.

First, the company's safety production work must implement "prevention first, reduce risks; People-oriented, law-abiding; Strengthen management, continuous improvement "policy, concerned about the implementation of the webmaster responsibility system, leaders of all departments should adhere to the principle of" managing production must manage safety ",production should obey the needs of safety, and realize safe production and civilized production.

2. Individuals and organizations that have made outstanding contributions to safety production should be rewarded, and accidents caused by violations of safety production systems and operating procedures should be dealt with severely. Those who violate the criminal law should be handed over to judicial organs for punishment.

Three, the mixing station should set up a safety working group headed by webmaster, composed of webmaster and the main person in charge of each department. Its main responsibilities are: fully responsible for the safety production management of the mixing station, researching and formulating technical measures and labor protection plans for safety production, conducting safety production inspection and supervision, and investigating and handling accidents.

Four: The comprehensive office is responsible for educating the employees of this unit about safety in production, and formulating detailed rules and operating procedures for safety in production. Implement safety production inspection and supervision. Execute all safety orders of the safety team to ensure safety in production.

Verb (abbreviation of verb) Division of responsibilities of the main persons in charge of production safety team: the stationmaster is the first person in charge of production safety in this unit, and the leaders in charge of various departments are the main persons in charge. All functional departments must do a good job in production safety within their respective business scope.

Six: the stationmaster should always check and urge all departments and team members to abide by the safety production system and operating procedures. Do a good job in safety inspection and maintenance of equipment and tools. Do a good job in the registration and custody of original materials.

Seven: workers should seriously study and implement the safety technical operation rules in production and work, and abide by various rules and regulations. Take good care of production equipment and safety protection devices, facilities and labor protection articles. If unsafe conditions are found, they should be reported to the leaders in time and eliminated quickly.

Eight: New employees, temporary workers, migrant workers and interns must go through three-level safety education before they can enter the operation post. Workers who change jobs must receive safety education again before they can take up their posts.

Nine: Personnel engaged in special types of work must undergo professional safety technical training, and be strictly examined by relevant departments before they are allowed to operate independently. Regular safety education and training must be carried out for on-the-job personnel of special types of work.

Ten: All kinds of equipment and instruments should not be overloaded or run with diseases, but should be used correctly, maintained and overhauled regularly. Old equipment that does not meet the safety requirements should be updated and reformed in a planned way. Electrical equipment and wiring shall comply with relevant national safety regulations.

XI: The layout of the workplace should be reasonable and clean. Toxic and harmful operations must have protective facilities.

Twelve: production houses and buildings must be strong and safe; The channel is flat and smooth, and there should be enough light; Dangerous places, such as pits, ditches, pools, platforms, elevators, etc. Safety facilities and obvious safety signs must be provided for production.

XIII: In dangerous workplaces such as high temperature, low temperature, humidity, lightning and static electricity, corresponding protective measures must be taken.

Fourteen: According to the nature of the construction site and labor regulations, all units must educate employees to use protective equipment correctly. Those who do not know the purpose and performance of protective equipment are not allowed to operate at their posts.

Fifteen: A system of regular occupational health examination should be implemented once a year for personnel engaged in harmful operations. Patients diagnosed with occupational diseases should immediately report to the comprehensive office of the mixing station, and the stationmaster and the comprehensive office should adjust their posts according to the situation and make a decision on treatment or recuperation in time.

Sixteen; Adhere to regular or irregular safety production inspection, and leaders of all departments should often go deep into the site to conduct safety inspection and supervision within their respective business scope.

Seventeen, each department can formulate specific implementation measures according to this system.

Job responsibilities of material manager

1: Strictly implement the warehouse management system and strictly control warehousing due diligence.

2. According to the material acceptance list, coordinate the relevant departments to accept, put in storage and pile up raw materials. If the specification, quality and quantity are found to be inconsistent, the acceptance shall be refused and the competent leader shall be reported immediately.

3. All kinds of materials in and out of the warehouse should be registered and summarized in time, accounted for by the issued documents in and out of the warehouse, and settled daily, which is consistent with the warehousing.

4 materials (including low-value consumables, parts, raw materials, fuel consumption, etc.). ) should be classified registration and accounting.

5. Do a good job in hygiene, keep the warehouse clean and tidy, and be responsible for the quantity of materials entering and leaving the warehouse.

Quality control measures of raw materials

1: raw materials are commissioned for testing according to the testing procedure.

2. In order to be consistent with the interface of ministry of materials and equipment, ministry of materials and equipment filled in the Raw Material Inspection Entrustment Form and submitted it to the laboratory for inspection together with the samples and the factory certificate (material list).

3. The materials department shall establish a "Material Entry Account", which shall be signed by the person in charge of purchasing, the material picker, the laboratory and the supervision engineer. Raw materials are stored by manufacturer, specification, model and grade, and the sample identification is marked (divided into inspected and pending inspection status).

4. After the laboratory is completed, the raw materials shall be identified (qualified or not).

5. Implement raw material monitoring procedures from sampling test to report release.

6. The raw materials that have passed the test shall be submitted to the resident supervision engineer for examination and approval, and can be put into use only after approval.

7: Inspect unqualified raw materials and start the unqualified raw material treatment procedure.

8. ministry of materials and equipment and Equipment Department set up raw material consumption ledger.