What are the safety hazards in coking plants?

Question 1: What are the safety hazards of pushing coke carts in coking plants? What preventive and countermeasures should be taken at the source of danger? Leave an email, I have operating procedures.

Question 2: What are the main tasks of safety production in coking enterprises? 1. Warning signs and safety signs at on-site positions must not be arbitrarily moved.

2. The ground on site should be smooth, and anti-slip measures should be taken in rainy and snowy weather; all passages, ladders, and roads should be unobstructed.

3. Frequently check that walkways, railings, high-altitude platforms, and ladders must be in good condition; all underground ditch covers are complete and intact.

4. The on-site lighting must be in good condition, and any defective lighting must be restored in time.

5. Fire-fighting equipment, indoor steam fire-extinguishing equipment and alarm devices must be kept in good condition and are not allowed to be used for other purposes, and must be kept by dedicated personnel.

6. Try to stand on the upper hand when operating to prevent poisoning.

7. When performing maintenance on pumps, motors and other equipment, do not wear gloves to prevent them from being involved.

8. It is prohibited to bake clothes on equipment, pipes and operating rooms.

9. It is strictly prohibited to throw tools, materials, ropes and other debris from high places to the ground. If necessary, special personnel should be provided to supervise.

10. It is prohibited to use rags, wooden sticks and other similar materials to block steam, gas or other liquid pipes and equipment.

11. When using rubber pipes to send steam for purging, the rubber pipes should be fixed with clips and should not be tied with wires or ropes.

12. Take timely measures and report when hidden dangers are discovered; rectify or monitor potential safety hazards in a timely manner.

Question 3: What are the safety hazards of playing with mobile phones while working in a coking plant? When using mobile phones in explosion-proof areas, sparks from the mobile phone circuit boards may encounter flammable and explosive gases in the environment, which may cause fires and explosions. Playing in the control room or while doing work may lead to operational errors due to lack of concentration

Question 4: Monthly manuscripts for safety production in the coking plant. Each workshop (department, office) of the factory:

In order to implement the spirit of the xxxx document, carry out the safety production month activities in depth, and do a solid job in safety production in the coking plant, the following arrangements are made for the safety production month activities:

1. Guiding ideology:

With the guiding ideology of "safety first, prevention first, and comprehensive management", we strengthen the sense of responsibility for safe production and anti-violation management, establish the awareness of full participation, and put safety as the supreme priority. Through various training and Carry out drills to improve employees’ safety prevention skills and awareness, and promote safe production in coking plants.

2. Activity theme and time schedule:

Activity theme: Strengthening the safety foundation to promote safe development

Activity time: February 2, 2016-x x day

3. Work objectives:

Through the implementation of the "Safety Production Month" activities, we will firmly establish the concept of people-oriented and safe development, and put safety production in a more important position. Improve the safety emergency plan system, promote the further implementation of safety production responsibilities, enhance employees' safety awareness, strengthen safety management, and nip potential accident hazards in their bud. (Safety production cloud training: bosafe)

4. Organizational structure:

Team leader: xxx Deputy team leader: xxx Members: xxx

5. Main activities Content:

1. Safety publicity. The Safety and Environmental Protection Department is responsible for producing safety publicity banners, and each department and workshop vigorously promotes safety atmosphere through pre- and post-shift meetings and blackboard newspapers;

2. Case study and experience activities.

Compiled the cases of safety accidents that occurred in the group company in the past six months into a book, printed and distributed them to each workshop team for study, and required each employee to write an "Accident Case Study Experience"; and selected by each workshop (20 in the coking workshop, 20 in the chemical workshop 10 articles, 5 articles from the electrical instrument workshop) excellent works will participate in the evaluation, and the top 5 "excellent works" will be rewarded;

3. Carry out the "Operation to Eliminate Hidden Danger" activities, requiring inspections around The specific safety hazards are as follows:

(1) Each workshop leader must carefully organize and mobilize employees to carry out the "Operation to Eliminate Hidden Hazards", requiring each employee to combine daily inspections, maintenance, inspections and production operations to find out potential safety hazards and boldly put forward their own rectification plans. Each person should find no less than 3 problems;

(2) The safety hazards reported by employees should be based on safety management deficiencies, on-site safety facilities, protective devices and The safety hazards existing in the on-site operating environment are mainly;

(3) The safety hazards reported by employees must indicate the hidden danger locations and defects, possible unsafe factors, and rectification plans;

(4) When each workshop organizes the "Operation to Eliminate Hidden Hazards", it must focus on high, deep, remote, remote and safety management blind spots, and the investigation coverage must be comprehensive to ensure that it extends horizontally to the edge and vertically to the end.

4. Organize post employees to carry out discussion activities on memorizing and explaining procedures. The participants are post employees, section leaders, and workshop leaders. The purpose is to standardize operating procedures and improve theoretical knowledge. This time, memorizing and following the rules was organized by the Safety and Environmental Protection Department.

5. Observe the emergency plan drill for accidents in the carbon black factory. The purpose is to improve the organization and rescue capabilities of employees in the factory for emergency accidents. Observers: workshop directors, section leaders, technicians, team leaders and heads of departments.

6. Organize and watch the safety education CDs of "Fire Prevention and Fire Fighting on Site", "Accident Case Warning Record", and "Safety Production Training for Grassroots Cadres". Organized viewing time and location: xx conference room on the third floor.

8. Accident plan drill activities. The details are as follows:

Coking workshop: power outage plan;

Chemical production workshop: power outage plan, fire and fire protection plan.

Organized by each workshop, the drill will take place from x to x, month x, and will be conducted in batches.

6. Activity requirements:

The Safety Production Month activities should be guided by the theme of "Strengthening the Safety Foundation and Promoting Safety Development", closely focusing on the company's annual safety management goals, and thoroughly implementing them The safety production policy of "safety first, prevention first, comprehensive management".

1. Each workshop and department should attach great importance to the implementation of safety month activities, hold a mobilization meeting around the actual situation of the workshop, and formulate a safety production month activity plan for the workshop based on the factory safety month activity plan and submit it to the Safety and Environmental Protection Department And promptly summarize the progress of the activities;

2. Each vehicle...gt;gt;

Question 5: Potential safety hazards for temperature measuring workers in the coking plant

p>

Question 6: Safety production in coking plant 6) Other safety regulations:

1. Warning signs and safety signs at on-site positions must not be moved arbitrarily.

2. The ground on site should be smooth, and anti-slip measures should be taken in rainy and snowy weather; all passages, ladders, and roads should be unobstructed.

3. Frequently check that walkways, railings, high-altitude platforms, and ladders must be in good condition; all underground ditch covers are complete and intact.

4. The on-site lighting must be in good condition, and any defective lighting must be restored in time.

5. Fire-fighting equipment, indoor steam fire-extinguishing equipment and alarm devices must be kept in good condition and are not allowed to be used for other purposes, and must be kept by dedicated personnel.

6. Try to stand on the upper hand when operating to prevent poisoning.

7. When performing maintenance on pumps, motors and other equipment, do not wear gloves to prevent them from being involved.

8. It is prohibited to bake clothes on equipment, pipes and operating rooms.

9. It is strictly prohibited to throw tools, materials, ropes and other debris from high places to the ground. If necessary, special personnel should be assigned to supervise.

10. It is prohibited to use rags, wooden sticks and other similar materials to block steam, gas or other liquid pipes and equipment.

11. When using rubber pipes to send steam for purging, the rubber pipes should be fixed with clips and should not be tied with wires or ropes.

12. Take timely measures and report when hidden dangers are discovered; rectify or monitor potential safety hazards in a timely manner.

Question 7: What lessons should be learned in each section of the coking workshop from personal injury and death accidents? First, we must carefully learn the lessons from the accident, check the various systems and job responsibility systems of **, and revise and improve what should be revised. For improvement, we must emphasize the strict implementation of various safety production responsibility systems and job responsibility systems, and draw inferences from one example to prevent similar accidents from happening.

The second is to strengthen the investigation and management of hidden dangers, immediately carry out safety inspections, thoroughly investigate hidden dangers, and ensure that there are no hidden dangers.

Question 8: Is the coking retardant dangerous goods? It should be precise*

Question 9: Safety slogans in the coking workshop of the coking plant are clever, and operating according to the regulations brings safety;

Reckless operations, and illegal operations bring disaster.

Don’t forget to keep the alarm ringing for safety;

Cherish life with a clear head.

Seek high yields while being safe, and everything will go smoothly;

Hidden dangers may arise from luck and setbacks one after another.