Are the carton compression tester, carton compression tester, empty carton compression tester, carton compression tester, stacking tester, pressure tester and carton compression tester the same machin

Are the carton compression tester, carton compression tester, empty carton compression tester, carton compression tester, stacking tester, pressure tester and carton compression tester the same machine? Carton compression tester is also called carton compression tester, carton compression tester, empty carton compression tester, carton compression tester, stacking tester, pressure tester and carton compression tester. It's all the same, but it's called differently. Hehe, do you need to buy it? I recommend a manufacturer to you: Dongguan Qinda Instrument Co., Ltd. Model: QD-3001A.

The compression tester is a large-scale test equipment, which is designed for the pressure test of transport packages. Due to the adoption of modern electronic technology, the measurement and control system of the equipment is very advanced. Using this equipment, not only the compression test of cartons can be carried out, but also the simulated stacking strength test and the set pressure test can be carried out. Compressive testing machine is an indispensable testing equipment for the quality inspection of finished carton products.

The machine produced by our company is controlled by a calculator with high accuracy. It is the most direct instrument to detect the compressive strength of cartons or other packaging containers, and can be used to judge the compressive strength of cartons and to test the pressure keeping and stacking. The test results can be used as an important reference for the stacking height of finished packing boxes in factories.

Main technical parameters: (can be customized according to customer requirements)

Design standard: TAPPI-T804 JIS-Z02 12

Taiwan Province province AC variable frequency motor drive, synchronous belt drive;

Adopt gapless ball screw to lift, which is accurate and stable;

Adopt American high-precision explosion-proof weighing sensor;

Using microcomputer controller to measure, double liquid crystal display:

Keywords compression value, maximum compression value (maximum crushing force), displacement,

Carton deformation (carton collapse deformation) and other four values.

Displacement is measured by Japanese high-precision encoder;

Model: QD-300 1A

Automatic printing of test data

High accuracy: the only resolution in the same class is 1/25000.

High sensitivity, instant judgment of collapse, automatic shutdown.

Allowable sample weight: 1T, 2T, 5T, 10T optional.

Resolution: 1/25000 accuracy: 1%

Compression space:1200×1000×1200mm, 600× 600× 600mm or 1500mm (size can be customized).

Compression ratio: 5 ~ 200mm/min.

Volume-host: 1980× 1200×2000mm or 2200× 1500×2350mm.

Weight-main engine: about 1350kg or about 1550kg.

Power supply: 1∮220v/50Hz.

The new compression detector has the following functions:

Compressive strength test function-used to determine the ultimate compressive strength of samples. The upper platen of the testing machine moves downward at a set speed, and after contacting with the sample, it applies pressure to the sample, and measures the pressure value of the sample at the same time, and measures the deformation of the sample from the time when the pressure value reaches the preset value. After the sample is crushed, the testing machine will automatically record the peak pressure and compression deformation of the sample. Is there any electronics factory to recruit general workers? 17 years old, from Dongguan

Stacking strength test function-used to determine the bearing durability of samples under simulated packaging and storage conditions. When the upper platen of the testing machine presses down the sample until it reaches the predetermined pressure, stop and start timing to measure the deformation of the sample. Under the influence of sample compression deformation, the pressure value decreases continuously. When the pressure drop value gradually approaches the lower limit of the pressure fluctuation range specified by the standard, the testing machine automatically supplements the pressure to the preset pressure and maintains it. During the whole test process, the testing machine repeatedly adjusts the pressure in this way to ensure that the pressure fluctuation does not exceed the specified range until the specified stacking test time is reached. When the total compression deformation of the sample reaches 100mm, the testing machine automatically terminates the test.

The function of fixed distance and fixed force test is used to determine the ultimate compressive strength of advanced samples with special requirements. The upper platen of the testing machine moves downward at a set speed, then the sample is pressed after contact, and the pressure value of the sample is measured at the same time, and the deformation of the sample is measured when the pressure value reaches 220N N. When the sample result reaches the preset pressing distance or pressure, the pressure value and the compression deformation of the sample will be automatically recorded.