Installation method of tempered glass partition

It is feasible to use a whole piece of tempered glass as a partition. However, it should be noted that when the installation area is too large, several pieces should be used for installation, each piece should not exceed 2.4 meters in length and 0.8 meters in width. This is because the price difference of glass exceeding this size is too big, and it is difficult to carry and install (it is difficult to support and fix the elevator).

Pay attention to the size

When the installation area is too large, multiple pieces should be installed, each piece should be no more than 2.4m in length and no more than 0.8m in width. ..

The price varies with the thickness.

The price of tempered glass varies with the thickness. Take the thickness of 12mm as an example (not exceeding the previous size). The price in Chongqing is 100- 140 yuan/square meter, and the wrapping fee is 3-5 yuan/meter. Commonly used thicknesses are 10mm and 8 mm, and the prices are lower respectively.

Various installation methods

The installation of tempered glass partition can be fixed from the upper and lower ends with metal clips or from the side wall. It can also be fixed with glass glue, but only if the glass is placed in the groove. So is the upper end of the glass partition. The installation of glass clips, because the price of stainless steel or other metal glass clips is very expensive (about 30- 100 yuan), people usually don't use clips in home decoration.

Woodworking as a seat

Glass partitions are generally made by carpenters, and the height is about 100. This seat is fixed on the ground, and there is a groove suitable for the thickness of glass in the middle of the seat. Put the glass in, it's very strong with glass glue. This method is relatively simple and economical.