Treadmill frequency will not be displayed on walker's code table.

Why is the tread frequency not displayed on the code table?

Why is the tread frequency not displayed on the code table?

1. Upload the step frequency data to display the step frequency on the walker code table. Open Walker in the browser, click on the list in the upper left corner, and select Upload Data on it. After selecting the Jia Ming code table, click to select the appropriate file. Find the Android folder in the phone memory and click Data.

2. Whether the magnet and the sensor are aligned and the distance is appropriate. 2. Whether there are problems with wires and contacts. I wish you an early settlement.

3. Compatibility. According to the query of McKinley riding platform system, due to compatibility reasons, the trampling frequency of McKinley riding platform is not displayed. McKinley Technology released the first generation of speed pedaling frequency sensor GEMINI200. The innovative dual-mode switchable design enables a single sensor to have four functions.

4. Rhythm shows rhythm. If SHOWCAD is set to NO in the initial setting, the function item will not appear. AVG。 Speed shows the average speed of riding. Press and hold the reset key to reset. AVG。 CAD (Average Treadmill Frequency) shows the average pedaling frequency of riding.

5. Click the middle button on the left to enter the page of running setting selection data, then scroll down, select Add and then select custom data, then select your favorite field, field 3, and select heart rate, so that you can see these three data at the same time when running, namely heart rate, step frequency and step number.

Step 6 reconnect. First, turn the Bluetooth switch of cars and mobile phones to the ON position. Then press Search for a new device in the Bluetooth settings of the mobile phone, display the car Bluetooth name and click Connect. Finally, in the pairing process, you need to enter the pairing code of the car Bluetooth, and then the connection is successful.

How to set the bicycle code table

How to set the bicycle code table

First, install the base of the watch, and determine where you want to install the watch on the bike, then install it with tools and fix it with glue. Select and fix the position of the sensor, and then install the induction magnet.

The code watch has left and right keys. As shown in the figure: right click to view options; Long press the left key to enter the setting and finish.

Set the wheel diameter: There are many kinds of wheel diameters for bicycles. You can get the exact wheel diameter by observing the tire. Then set the corresponding wheel diameter according to the code table. Note that tire data is the most accurate. If there is any difference in packaging, the outer tire shall prevail.

Adjustment steps of bicycle watch. The 300 13 bicycle watch has three keys, of which the left and right keys can set the time. Right-click first, check the option, and find the time option. Long press the left key to enter the settings. Right-click again to change it to the desired value.

Long press the left key to set. Bicycle watch is an electronic product used to calculate mileage and speed. It consists of an induction magnet installed on the steel bar of the front wheel rim, an inductor installed on the front wheel rim, a code watch seat installed on the handle along the connecting line and a code watch located on the seat.

What if Jiaming app can't find Jiaming Stepper?

What if Jiaming app can't find Jiaming Stepper?

Open the mobile phone desktop directly and click Settings to enter. At this time, you need to choose application management jump. Next, continue to click on the Garmin Watch APP there. If there is no problem, select Rights Management. After the above operations are completed, confirm that background operations are allowed according to the figure.

Click the middle button on the left to enter the page of running setting selection data, then scroll down, select Add, then select custom data, then select your favorite field, field 3, and select heart rate, so that you can see these three data at the same time when running, namely heart rate, step frequency and step number.

Long press the up key. Press the up key on the home page to enter the settings, find "Sensors and Accessories", and click to search for new sensors. Many sensors can be connected, such as stepping frequency, riding a car, power meter and so on. And you can learn a wealth of information such as speed, distance, and trampling frequency. With ANT, multiple devices can be linked at the same time.

First, open Jiaming frequency stepping software and enter the main page of the software. Secondly, click Settings in the page to enter the Settings page. Finally, click the linked code table in the page to complete it.

Spinning bikes connected to Bluetooth do not display the tread frequency.

Spinning bikes connected to Bluetooth do not display the tread frequency.

1, no connection, either your mobile phone doesn't support it, or you are operating in the wrong way. First, put the Bluetooth switch and mobile phone device of the car Bluetooth in the ON position. Then press Search for a new device in the Bluetooth settings of the mobile phone, display the car Bluetooth name and click Connect.

2. The Bluetooth signal is unstable, which is beyond the coverage of Bluetooth. Moby's rotating Bluetooth connection has no data, which may be caused by unstable Bluetooth signal. Re-enabling Bluetooth can solve the problem.

3. Abnormal pedaling frequency of 3.keep spinning bicycle: Generally, it is abnormal sound caused by the damage of steel balls in bearings, which needs to be replaced. After confirmation, find the seller to reissue the corresponding bearing and disassembly tool, and just change it.

4. Connect the Bluetooth keep spinning bike: enter the phone settings-Bluetooth module, and turn on Bluetooth to search for available devices. If there is no paired device, please click the Bluetooth name of the smart bracelet in the available devices to pair.

What if the mountain bike meter doesn't respond?

What if the mountain bike meter doesn't respond?

1, check whether the distance of the sensor is within the specified distance, generally 5 mm If it is a wired meter, check whether there is any problem with the contact between the line and the meter base. There are also some poor internal contact of the watch, which is also the reason why the watch does not work.

2. There are several reasons: the sensors on the wheels are not aligned; The watch is dead; There is a problem with the contact between the code watch and the watch base; The watch is broken. .

3. Please check the code table from the following three aspects: whether the metal point of the meter head is in good contact with the metal point of the meter seat; The magnetic head and sensor of the code meter are installed on the right side of the car (opposite to the disc brake), and the shortest distance is not more than 0.5cm；; The code table cannot be in the setting state, but should be in the running state.

The pedaling frequency of McKinley riding platform is not displayed.

The pedaling frequency of McKinley riding platform is not displayed.

Set in the stepper. Install frequency stepper correctly to ensure the distance between magnet and transmitter. Generally, as long as you turn the crank and see that the green light of the transmitter is on (usually only three times), it means that there is no problem with the position.

The connection method is as follows: First, download, install and open the McKinley stepper. You will be reminded to turn on Bluetooth when it is turned on. When it opens, click Add Device McKinley Stepper. After waiting for the APP to connect successfully, you can connect the phone with the treadmill.

The battery replacement method of McKinley treadmill is as follows: There is a groove just below the orange display button on the top of the treadmill. This is the key to the pedometer. Use a screwdriver as a pry knife, insert it into the groove and rotate it.

How to connect McKinley's riding platform code table: Open Walker in the browser, click on the list in the upper left corner, and choose to contact us. Then select upload data on it. After selecting the Jia Ming code table, click to select the appropriate file. Found the Android folder in the phone memory.

Adjust the app, connect the code table in the code table through the app, set the displayed data in the page settings, and you can watch it.

The higher the pedaling frequency, the smaller the resistance given by the riding platform. In ERG mode, the riding platform will automatically adjust the resistance according to the pedaling frequency of the rider, so that the power can be maintained at 300 W. The intelligent riding platform can automatically adjust the resistance through the electromagnetic damping generated by the electromagnetic coil, which is beyond the reach of ordinary riding platforms.