Hello, I lost my welder's certificate. How can I reissue it?

If you have obtained the national vocational qualification certificate in the province, you need to get in touch with the vocational skill appraisal institution and apply for a replacement certificate. The above materials shall meet the requirements of provincial vocational skill appraisal institutions.

If the vocational qualification certificate is lost, it shall be declared invalid in the newspaper according to the requirements of the Ministry documents, and the individual shall write a description, and the relevant institute (station) shall issue a certificate before handling a new vocational qualification certificate. The reissued certificate uses the original certificate code and the serial number of the new certificate, and it is indicated in the remarks column.

How to reissue the welder's certificate, the following three suggestions are for reference:

1, the welder certificate must be supplemented by the certificate of the local issuing authority, that is, the talent training institution of the Human Resources and Social Security Bureau.

The old certificates before 2.20 1 1 are independent certificate numbers, and the certificates after 20 1 1 are all new certificates. The certificate number of the new certificate is the sub-certificate number, and the welder's certificate can only be supplemented by entering the certificate number at the Safety Supervision Bureau or the issuing authority in official website.

3. You can go to the training institution designated by the original government to reissue it. It usually takes about 30 days to get the certificate. Generally, you need to submit a copy of your ID card and two one-inch photos.

Extended data:

Welding certificate

Fusion welding and hot cutting operations (electric welding, gas welding, arc welding, electric welding and gas cutting, etc. ) also called work permit. The issuing agency-Work Safety Supervision Administration has the necessary employment certificate. You don't work without a certificate. It is divided into fusion welding and hot cutting operations, pressure welding operations and brazing operations. The certificate is a magnetic card, which is common throughout the country.

Fusion welding and hot cutting operations

Suitable for gas welding, gas cutting, covered electrode arc welding, carbon arc gouging, submerged arc welding, gas shielded welding, plasma arc welding, electroslag welding, electron beam welding, laser welding, oxygen flux cutting, laser cutting, plasma cutting and other operations.

Pressure welding operation

Suitable for resistance welding, gas pressure welding, explosive welding, friction welding, cold pressure welding, ultrasonic welding, forging welding and other operations.

Brazing operation

Suitable for flame brazing, resistance brazing, induction brazing, immersion brazing and furnace brazing, excluding soldering iron brazing.

The welder's special mount guard operation certificate is issued by the safety supervision bureau and can be used anywhere. It used to be called IC card, but now it is called proximity card, which is audited once every three years, just like ID card.

As long as there is a dedicated card reader, you can read the information in the card, but this card reader is only provided to qualified units, such as schools and safety supervision bureaus.

No matter where you take this card, as long as you have a card reader, you can read it and have an annual inspection. Inquiries can also be made on the website of the Safety Supervision Bureau of the issuing department, and the card number can be entered.

References:

Baidu encyclopedia-welder certificate