Construction method of water-based coating for chenyang wall surface

The construction method of morning sun wall topcoat is divided into the following steps:

1. Stand by. First of all, we must ensure that the wall is dry, dust-free, oil-free and sundry. If there is residue, wipe it clean with a rag. Then according to the actual needs, choose the appropriate brush and water paint, and dilute it according to the requirements of the manual.

2. Brush top coat and primer. First, coat the wall with white top coat and primer, and then wait for it to dry completely. Then use colored paint as the base to make the subsequent coloring more saturated and achieve better results.

3. Brush with water-based paint. After priming, water-based coatings need to be stirred and diluted first, which makes it easier to be coated on the wall, and at the same time, it can effectively save water-based coatings. Then, when using the brush to smear the wall surface, we need to pay attention to avoid problems such as brush marks, messy bristles, brush leakage, brush weight and so on, so as to avoid unevenness and collapse.

4. Spray with a press. Sprayed with a voltage machine into a large area of air compressed particles, suitable for cleaning unobstructed building surfaces and rough surfaces, such as concrete and cement.

5. retouch. After the water paint is dried, it needs to be polished and reinforced to avoid the influence of external factors such as wind, rain and sun on the wall. This process takes time, so it is recommended to give enough time before work, so as not to affect the construction effect.

Generally speaking, the construction method of wall water paint in Chenyang needs to be operated according to specific conditions, and attention should be paid to details such as water paint dilution, priming and layered painting in the process to achieve better wall effect.