Experts reveal that light brick partition wall is easy to fall down? What are the requirements for use?

Lightweight brick partition wall generally refers to the non-load-bearing wall used for building partition wall, which is made of light brick or light block through special adhesive. After years of development, it has become an important part of new building materials.

Lightweight brick partition wall generally refers to the non-load-bearing wall used for building partition wall, which is made of light brick or light block through special adhesive. After years of development, it has become an important part of new building materials. So, is the lightweight brick partition easy to fall off? What are the requirements for the use of lightweight brick partition walls? Let's have a look.

1. Does the lightweight brick partition fall easily?

Lightweight partition walls are generally reinforced by drilling holes during installation! There is basically no big problem! It won't fall. Lightweight wall is a new concept different from solid wall. Although light wall materials are different in price, sound insulation performance, wall bearing and hanging force, fire prevention and waterproof performance.

Many owners will think that lightweight bricks are light and weak, and refuse to use them for fear that the TV set will not hang firmly. In fact, according to our practical experience, even if the building height is more than 3m, the light brick will hang TV sets or even 4 sets on the same wall, equipped with a high-grade subwoofer. I shook it for hours, but I don't know which wall and TV set fell off. Of course, such a load still needs to be reinforced with a wooden foundation outside.

At present, it is very common that red bricks are used in the parts where TV sets are hung and light bricks are used in other parts in the masonry sub-projects of residential decoration. The common specification of lightweight brick is generally 600 * 300 * 80/100/120. If it can be built to a height of 2400mm or 2700mm regardless of loss, then the partition wall within this height range needs to be cut. The gap between the cutting surface and the floor or beam bottom is not suitable for red brick extrusion. If a space of 20-30 mm is reserved, it is not necessary to cut it into small pieces and fill it with foaming agent.

Second, the use of lightweight brick partition requirements

1, strictly control the quality of lightweight brick masonry.

Before on-site wall masonry, the quality of lightweight brick masonry should be strictly controlled, and tests can be carried out when necessary to ensure that the performance of lightweight brick meets relevant requirements. At the same time, buyers are also required to consider not only the price but also the product quality when buying lightweight bricks. It is best to choose a reputable manufacturer when ordering building blocks, and incorporate product quality assurance into the purchase contract. Before construction, material quality inspection shall be carried out, and qualified lightweight bricks can be put into use.

2. Reasonable design of construction scheme

On the quality control measures of lightweight masonry construction, based on drawing design, design standards, construction specifications and local atlas, combined with our company's construction experience, targeted QC activities are carried out for common quality problems. There are special Rachel reinforcement measures for the connection between masonry and concrete beams and columns, as well as waterproof, heat insulation and sound insulation measures. When plastering the external wall, add anti-crack steel wire mesh and waterproof layer to avoid cracking and leakage of the external wall.

3. Strengthen the quality control management of masonry engineering.

For some lightweight blocks made of various materials, special construction schemes and technical measures must be formulated, responsibilities should be implemented layer by layer, technical disclosure to on-site management personnel and production workers should be strengthened, quality acceptance should be strictly controlled, and inspection times should be increased, so as to effectively avoid common quality defects of lightweight wall workers. According to different blocks, control the moisture content of block masonry; Pull rod and anchor bar should be straightened and placed horizontally in mortar joint; The height of different blocks should be controlled on different days; The hollow wall next to the hole must be filled with walls and frames to ensure the integrity and stability of the wall.

The above is compiled by Bian Xiao for everyone, about whether the lightweight brick partition wall is easy to fall down, and a use requirement of the lightweight brick partition wall. I believe everyone should be at ease when using lightweight bricks to partition the wall. I hope the above contents are helpful to you.