What does a process engineer do in a factory? How is the salary?

A process engineer is a technical position in a manufacturing company. He is mainly responsible for improving the technological level and quality of the company's products. He can be called a technical generalist in the factory. He has to be exposed to everything and understand everything. a little.

Process engineers can be mainly divided into manufacturing process engineers and mechanical process engineers. In factories, manufacturing process engineers are the main ones, and it is also a technical position.

What does a process engineer do in a factory?

The main tasks of the process engineer are: 1. Responsible for preparing product process documents and formulating material consumption process quotas; 2. Designing process equipment according to process needs and responsible for the verification and improvement of process tooling; 3. Guidance . Supervise front-line production in the workshop to promptly solve technical problems arising in production; 4. Responsible for the design of process tooling for batch trial production of new products, improve trial production reports and relevant process materials, and participate in new product identification work; 5. Carry out technical research and technical improvement work, Improve the level of process technology.

How much does it cost to work as a process engineer in a factory per month?

This aspect cannot be generalized. A high person can earn more than 10,000 yuan a month, while a low person can only earn a few thousand yuan. Taking the second-tier city where I live as an example, a process engineer with about 5 years of work experience, The monthly salary is about 6K-10K. A process engineer with strong comprehensive technical ability can have a monthly salary of close to 20,000. In my opinion, it is a good technical position.

What do you think of a process engineer? Want to be a process engineer? Welcome to communicate!

Improve the process flow of equipment, increase product productivity, reduce product defective rates, analyze the reasons for product defects caused by failures encountered during equipment production and operation, avoid the occurrence of defects next time, and cooperate with the development department to develop new products. products.

It is a very important position in the company, and experienced process engineers are difficult to replace.

As for the salary and benefits, it depends on each industry. I have seen the current semiconductor industry. The salary of process engineers in packaging and testing companies is more than RMB 10,000. At that time 10 years ago, the old man in the steel plant was familiar with the steel production process and earned an annual salary of 20,000 to 30,000 yuan, because the graduate students recruited in the steel plant were not as accurate as the old man in conducting experimental research data.

Adjusting parameters, writing work instructions, arranging production lines, occasionally doing maintenance, sometimes installing some software on machines, and following a trial production project, they are all just messing around

Process engineers can be understood as technical support for production lines and technical mentors for production employees. For example, write SOPs, analyze and assist in handling various exceptions, etc.

Salaries vary depending on industry and region. However, compared with other engineers in the same company, such as quality engineers, IE engineers, purchasing engineers, etc., their wages are generally not at a disadvantage.

Take a factory where I worked before as an example.

The main job of a process engineer is to undertake various projects. The factory I worked in before was a contract processing plant, processing and producing mobile phones for Huawei and Xiaomi. The work a process engineer needs to do every day is to understand product drawings and design Produce molds, prepare SOP operating methods, and formulate a specific production process together with the factory director, section chief, and production section chief.

Preparatory work in the early stage of undertaking a project: prepare product drawings - design or find suppliers to prepare molds and production equipment - find craftsmen to debug equipment - start testing with products - modify molds or machines - Prototype test OK - mass production

The second question: How much is the salary of a process engineer per month?

This also depends on the score, whether the project is undertaken or not.

The monthly salary for those who undertake the project ranges from 20,000 to 50,000, and the monthly salary for those who do not undertake the project ranges from 6,000 to 15,000.

I have worked in a Japanese factory for 2 years, and the department I belong to is called the Engineering Technology Department! They are responsible for the development and trial production of new products. Based on the technical drawings provided by foreign countries, they produce operating standards, that is, work instructions, and produce engineering flow charts. In layman's terms, they are the steps of each production step of a product! As needed, we also need to design relevant fixtures, that is, molds, as well as calculate process hours and modify the assembly line to improve production efficiency!

If you refer to process engineers alone, it probably includes the above-related content. It depends on which area you are responsible for! Most of it involves tinkering with the production line, allowing workers to use the most comfortable movements and the most time-saving steps to produce more qualified products in the shortest time!

Salaries in Japanese factories were based on academic qualifications. Undergraduate students were several hundred higher and had a little more subsidies. They mainly relied on overtime to increase their income. Japanese factories had a salary increase of about 2 years. There is a chance for promotion once, and the overall income is below average!

The above is my personal experience of working in a Japanese factory for 2 years

First of all, it depends on which industry you are a process engineer.

Taking Suzhou, Jiangsu as an example, the salary of process engineers in the garment industry is not high, around 4,000-5,000. Because he is not paid on a piece-rate basis, it is relatively easy.

Mold industry. Process engineers in this industry are required to have rich experience and strong professional knowledge. The salary is around 7000-8000.

Machining, die-casting, and stamping industries require certain skills and experience. The starting salary of a process engineer is 6,000.

Injection molding industry. The development of this industry is similar to that of the machining industry.

Electronics industry. This refers to Foxconn, Compal, Wistron, Quanta and other Taiwanese factories, which are about 6,000-7,000. If European and American companies add about 1,000.

Semiconductor industry. This industry has high profits and requires good skills, usually 10,000 yuan or more.

Process engineers are equivalent to the brains of manufacturing companies and are important advisers to corporate bosses. The configuration of tooling equipment in the production process, the logistics process starting from raw materials, the entire floor plan, staffing, power consumption, etc., should be controlled by It is also the responsibility of process engineers to design, arrange and provide information, including future technical transformation and the adoption of new equipment and new processes to improve production efficiency and reduce product costs. Therefore, process engineers not only have to guide production in daily life, but also have timely control Scientific and technological information on similar products, absorbing and transforming the original production process, so that the company can remain invincible in the market competition. As for the treatment, it is inseparable from the product category, company efficiency, and personal contribution. Its treatment should be above the middle level of the company. level.

The simple thing is to solve the defects found in on-site production and analyze the causes