What are the solutions to the uneven cutting of sawing machine?

When sawing materials on a sawing machine, the cut surface of the sawed material sometimes appears uneven, which is caused by many reasons. Let's analyze the treatment methods of uneven cutting caused by different reasons.

1. The feed frame and tray of the sawing machine are not on the horizontal plane, so they must be kept horizontal to make their workpieces smooth.

2. The sawed workpiece may be too hard, the blanking speed is too fast, and the feed rate is too large.

3. The band saw blade may be damaged. Replace the saw blade.

4. The distance between the tool and the left guide arm of the sawing machine and the workpiece may be too far. Closer, the distance between the left guide arm and the workpiece is 6- 10 cm.

5. It may be that the gap between the alloy block clamping the saw blade and the saw blade is too large, so it is enough to narrow their gap.

6. The saw blade of the sawing machine is not tensioned, and it is basically feasible to tension the saw blade.

If you look at the above aspects after encountering problems, you can basically find the problem and then make adjustments. However, the specific treatment of some problems is more troublesome and needs experienced sawing machine master to teach.