Summary of probation work 12 words General Edition Year of the Tiger

Friend, have you gained some growth during this probation period? Let's make a summary of the probation period! The following is the "12-word summary of probation work" compiled by me for everyone, for reference only, and you are welcome to read it. Summary of the probation period is 12 words

In a blink of an eye, the three-month probation period is coming to an end. Looking back on the time when I first arrived at xx College, with the enthusiastic support and help of school leaders and teachers, I did a good job in teaching and actively completed all the tasks assigned by the school. Below I will make a brief report and summary of the work during the probation period.

1. Political thought:

I deeply realize that improving political and ideological awareness is the basic prerequisite for carrying out good education. Therefore, I care about major events at home and abroad and pay attention to the study of political theory. Usually, I actively participate in the faculty meeting and the party's democratic life meeting organized by the department, take notes carefully, study the superior documents issued by the school, and learn some information from them to facilitate my continuous progress. At work, I strictly abide by the rules and regulations of the school, unite my colleagues, and finish the tasks assigned by the school in time.

second, education and teaching:

this semester, I teach the sales promotion of the automobile marketing class in the Department of Mechanical and Electrical Engineering. In the teaching work, I can prepare lessons carefully, study teaching materials, try to accurately grasp the key points and difficulties, pay attention to various materials, formulate teaching methods that conform to students' cognitive rules, and carefully write teaching plans. I also carefully design the classroom teaching, pay attention to the students' initiative in class, and try to give consideration to students at all levels, so that each student can learn something and prepare each class carefully. Some group activities are organized in combination with the contents of the teaching materials, so as to make the classroom atmosphere as active as possible, let every student participate in it, stimulate their interest in selling this subject, and let them master the selling skills and methods in the activities. After class, I also pay attention to listening to students' opinions, keep abreast of students' learning situation, and make corresponding improvements according to their level.

Listening to lectures is a good way to improve one's teaching ability. Only by attending more lectures can new teachers gradually accumulate experience. Every teacher has his own unique style and something worth learning. As a new teacher, I attend lectures extensively. During these three months, I listened to the marketing courses of teachers Ping Jiang, Xu Qin and Lu Chunhui in our teaching and research section, and also listened to the retail course of teacher Liu Xiping in the logistics teaching and research section, which greatly promoted my teaching. By listening to the courses of my predecessors, I learned their teaching experience and tried to explore a teaching model suitable for me.

Third, the direction of future efforts:

1. Try to listen more, think more, write more and communicate more in improving their own teaching level;

2. Classroom discipline needs to be improved;

3. Always learn from senior teachers, hoping to learn more knowledge from them and be independent;

4. Always read books, do more courseware and often write papers;

5. Take an active part in school training and constantly enrich your experience and skills in practice. The above is the summary of my three-month probation period. As a new teacher, I still need to work hard in many aspects in the future. I hope that the department leaders and teachers will give me guidance. I will repay the training of my school with unremitting exploration and struggle and become a qualified people's teacher! Summary of probation work 12 words

The work of the security department plays a very important role in the development of a company. Since I took over this work, I first warned myself that responsibility is the first priority, and only by being careful can the work be put in place. After familiarizing myself with a series of security work, such as various computer rooms, checking all the fire fighting and security equipment and facilities, I carefully recorded the problems existing in various links, parts, construction sites and warehouses, and looked for loopholes and deficiencies according to the construction drawings and reality. Arrange one by one, insist on daily inspections, inspections and records, and make some work plans and work arrangements through several days of field work.

takeover and acceptance of the fire protection and security system. This work requires both professional knowledge and certain skills. I study the relevant knowledge carefully. According to some work experience, I pay special attention to key parts and parts that are prone to errors. The detailed rules are as follows.

1. The indoor sanitary conditions of the fire control, security control center and fire pump room are clean and tidy, without any sundries piled up. The appearance of the main engine of the automatic alarm system is clean, the function keys of the operation control panel are sensitive and effective, and there is no ups and downs in the system. The pressure lines of each connection port are firm and firm, and each fire pump is clearly marked.

2. The fire-fighting pool and fire-fighting water tank have reserved water that meets the fire-fighting design requirements, and the power supply of the system is normal. The pipe network of the wet spraying fire extinguishing system is full of water, and the valves of the system are in normal working condition without leakage.

3. Check the control function test and linkage function test of the automatic fire alarm system, start the manual fire alarm button, and the alarm place should have an indicator light to confirm the alarm signal and output the fire alarm signal. After receiving the alarm signal, the fire alarm controller will send out an acoustic or optical signal to alarm, and all the fire fighting equipment will be linked when the main engine is in the automatic state.

In the acceptance of security and fire-fighting equipment and facilities, check the found problems with the manufacturers one by one, and urge the rectification. The problems are as follows:

1. Replace the broken glass on more than 1 fire doors out of more than 5 fire doors; Maintenance, adjustment and repair are carried out for nearly half of the blunt plugs of the lock core of the fire door switch lock that cannot be opened normally.

2. When the No.6 rolling gate was inspected, the rolling gate could not be opened normally. It was found that the signal receiver was faulty, and the factory personnel were supervised to repair it on the spot.

3. As the pipeline of the security infrared system is an exposed pipe, in order to prevent potential safety hazards, I am responsible for supervising and checking that the security manufacturers change all the exposed pipes of the infrared system into concealed pipes according to the instructions of the leaders.

according to the site situation, formulate the recruitment of security personnel, set posts and personnel, formulate the post responsibilities of each post, and solve and improve the accommodation problem of foreign security personnel. The staffing is as follows:

1. 1 security supervisor

2. Internal security personnel: 4 monitoring foreman, 4 monitoring duty crew members

3. External security personnel: 1 monitor, 4 gate guards, 2 peripheral patrol officers and 4 central duty crew members.

for the shortage of security system, according to the site situation, it is suggested that the company install cameras inside and outside the reservoir area, which greatly improves the monitoring and anti-theft inside and outside the reservoir area, and is very beneficial to real-time monitoring of suspicious trends.

49 fire doors and 14 glass doors in the reservoir area were numbered uniformly, and temporary numbers were pasted. The water bags and gun heads in 72 fire hydrants in the reservoir area were counted, and the fire hydrant seals were pasted after verification. A no-smoking icon was pasted in a prominent position throughout the reservoir area to warn all personnel that smoking was prohibited in important areas of the reservoir area.

after receiving the existing 155 door keys in the reservoir area and checking them on site one by one, each key is affixed with a position mark, and then temporarily sealed in a filing cabinet to ensure normal use in future work, and key management regulations are formulated.

check the experiment of making epoxy floor paint samples by three manufacturers, protect the production area from being damaged by people during the production process, take photos on site and record the daily production process, and compare the samples made by the three manufacturers.

2. Installation and debugging of equipment

1. Cooperate with security manufacturers to install the adjustable access control system.

2. supervise and inspect the installation of the gate gate and the three-roller gate.

3. Cooperate with elevator manufacturers to install five-way intercom and personally go to the installation site to test whether the call quality is clear one by one.

Third, make further progress

After comprehensively and systematically sorting out all the security work, I began to supervise and inspect the personnel management work.

1. arrange the contents and requirements of the daily work of the cleaning staff, and the responsibility lies with people, and check the quality of work at any time.

2. Every day, I carefully check whether all the equipment and facilities in the reservoir area are in good condition, record the problems and report them to the superior leaders in time.

3. Supervise and inspect the waterproof manufacturers to do roof waterproofing again. After the completion, do the waterproof test on the roof, and start the fire hydrant pump to supply water. After 24 hours, test the waterproof quality of the roof. I recorded the whole production and inspection process one by one and took photos on the spot.

4. Make a file card for security personnel, register and put on record the existing security personnel, and understand the specific situation of security personnel so that the company can better manage the security personnel.

5. Conduct unscheduled daily inspections on the existing security guards, correct the mistakes in time when found, and work out the workflow of the post.

The above work is part of my daily management in the past two months, and there are many urgent tasks arranged by the leaders at any time, which I have tried to complete. And cooperate with the company to recruit security staff, accompany the company leaders to inspect the site of the reservoir area and answer the questions raised by the leaders one by one. I am well aware that there is still a certain gap between the needs of work and the expectations of leaders, but I believe that with the care and help of leaders, I will definitely complete all the tasks better, and at the same time cooperate with all departments to contribute all my strength to the development of the company. Summary of the probation period

This teacher loves his job, takes teaching as pleasure, takes teaching as pride, puts all his energy and ability into everything for the development of children, consciously abides by professional ethics and norms, and sets up a good teacher image. In the classroom, follow the lead and strive to create a harmonious learning environment for students; After class, take the initiative to explore teaching methods and learning methods with colleagues, cooperate happily, learn the advanced methods of excellent teachers, and cooperate tacitly with classmates to realize the same frequency vibration. Major issues, the overall situation, unity and cooperation, try to complete the tasks assigned by the school. The school leadership often talks with her to find out what the teacher thinks in thought. Ice Muscle helps her solve the confusion and unload the burden, which makes her relaxed in thought and lays the foundation for better teaching.

Second, in life:

As always, care about the special post teachers in life. The school leaders provide a good learning and growth environment, and the teachers around them give those valuable teaching experiences to young teachers without reservation, so that the special post teachers can grow rapidly in their teaching work.

Third, at work:

This special post teacher is modest and enterprising, enterprising, principled, warm and generous, caring for the collective and others, and has team spirit. During the day, I insist on working in the office except after class, studying textbooks, writing lesson plans and correcting homework meticulously. Conscientious, conscientious and hard-working, the school arranged this teacher to take the post of second-grade head teacher, and let the excellent head teacher impart experience in student management, so that he can adapt to the teaching environment as soon as possible. The teacher is really competent in class management and manages the class in good order. And assist the school leaders to do a good job in student union management, and their work attitude has been well received by leaders, teachers and the masses.

In the past, it was always felt that the new teachers who had just set foot on their jobs lacked teaching experience. However, the special post teachers were young and lively. From the teaching work in the past three years, young teachers also had their own uniqueness in teaching. With careful training, they will gradually become an important force in school construction.

note: won the first place in the second "primary and secondary school sports meeting" in the county in 2xx; Won the third prize in the 2xx provincial Coca-Cola Cup campus football summer camp. Summary of probation work 12 words

I am the warehouse keeper of xx warehouse in the storage and transportation department of the company: XX-a native of Shandong. I entered the company in X this year, and as a new employee, I entered a high-speed logistics company, which is very happy. I think this is a new beginning of my career, because I have trust, diligence and development in Shengna Road.

part ii: reasonable arrangement and application of manpower

1: arrangement of manpower

as a traditional business of logistics companies-warehousing, although not technically high, requires diligence, prudence, intense work and high physical requirements. Like our xx warehouse, with the continuous entry of customers, the business is increasing. Originally, it is relatively compact in terms of manpower, which requires us to arrange loading and unloading workers reasonably, so as to make reasonable arrangements on limited manpower, so as to be orderly and operate smoothly. Especially when there are multiple tasks at the same time, such as sometimes export packing, TOTO domestic finished product delivery, TOTO factory parts inclusion and other operations will meet together. At this time, it is necessary to arrange personnel reasonably so that each operation will not be affected as much as possible.

2: Reasonable rest

When packing at the export, there is a large amount of storage work and a lot of sweating in the hot season. Like some boxes, each finished box is covered with a plastic bag, which is very slippery, so you can't hurt the box when packing, and the operation requirements are high and difficult. In a box of more than 4 degrees, you will soon be sweating, so you should arrange your homework and rest reasonably, so that you can take turns to rest and work without interruption, so that your work efficiency will not be affected under the condition of ensuring the safety of your work.

3. Training and improvement of personnel

Although the work of loading and unloading workers is relatively simple, in order to continuously improve their work, we should constantly remind them of the rules of on-site operation and the requirements of customers, which is conducive to our warehouse management, tally and distribution. Their work efficiency will also be improved.

Part III: Management of Goods

Since the opening of xx warehouse for more than three months, raw materials have successively entered xx warehouse. Part or all of the customer's parts, finished products and exports are kept in the * * warehouse. Therefore, it is necessary to do a good job in warehouse management, goods in and out of the warehouse, daily storage and warehouse cleaning, manage the inventory quantity well, prevent unnecessary loss and effectively use the inventory area.

A: easy-to-take, easy-to-put, easy-to-see, easy-to-point stacking method,

B: goods should not be stacked over pallets or over high, and attention should be paid to "five distances".

C: pile foot cards should be recorded when goods enter and leave (counting the number of boxes and pieces)

D: goods should be first in and first out, for frequent entry and exit. The smooth passage

mainly includes:

1. Management of parts

1. warehousing operation of parts

At present, most parts have been kept in xx warehouse. As a component of finished products, there are many kinds of parts, which are roughly divided into F parts and D parts. From the processing manual, there are manual products (bonded products-stored in bonded areas) and non-manual products. When the parts are transferred to the warehouse, it is often messy: the outer box of the parts is broken because it is a turnover box, and it will be used until it cannot be used. Moreover, the number of incoming terminals is sometimes chaotic, so it is necessary to sort out and count each model, box number and terminal number; Therefore, we must be more careful and pay more attention to counting.

2: outbound operation of parts

The production line will fax the parts inclusion list to our warehouse before 1 o'clock every day according to the production plan, and we will distribute the goods according to the inclusion list. If there are "priority outbound" parts on the list, we should distribute them to the production line again, so as not to delay the operation of the production line. Parts should be neatly placed in the